Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight spools of 1.75 mm PLA+ filament in assorted colours, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA+ Pro 8-pack 1.75 mm 1 kg 3D printer filament

SKU CH-ZE79-8JJ0H

Eight 1 kg spools of 1.75 mm PLA+ filament in six colours, vacuum-sealed with desiccant and held to ±0.03 mm accuracy

  • TypeFilament
  • Eight colour spools in one box for project variety
  • Vacuum sealed with desiccant to keep filament dry
  • Dimensional accuracy of +/- .03 mm for consistent extrusion
  • Made from 100 % new high-purity PLA+ for low warping
  • Compatible with common 1.75 mm FDM printers

Multi-colour PLA+ bundle for FDM printers

This eight-spool set delivers 8 kg of 1.75 mm PLA+ filament in a curated palette: two black spools plus one each of white, light blue, bronze, green, fluorescent yellow and purple. Each spool is vacuum-sealed with desiccant to resist moisture uptake. The material is aimed at makers, educators and small-batch producers who want colour variety without ordering separate rolls.

Dimensional tolerance and printing behaviour

The filament holds a diameter tolerance of +/- .03 mm, promoting consistent extrusion and strong layer adhesion. The supplier states the formulation reduces shrinkage, warping, clogging and bubbling during normal printing. Spools measure 7.88 inch diameter, 2.69 inch width with a 2.20 inch hub hole, fitting standard 1.75 mm FDM machines from brands such as Creality, Prusa, Ultimaker and others listed.

Ready-to-use packaging and material claims

Every 1 kg spool arrives in its own sealed box, giving a total of 17.60 lbs of material that can be stored or distributed across projects. The manufacturer describes the resin as 100 % new high-purity, non-toxic and environmentally friendly, yielding a smooth surface finish. Note that on-screen colour representation may differ slightly from the physical filament.

Pluspunten

  • Eight colour spools in one box for project variety
  • Vacuum sealed with desiccant to keep filament dry
  • Dimensional accuracy of +/- .03 mm for consistent extrusion
  • Made from 100 % new high-purity PLA+ for low warping
  • Compatible with common 1.75 mm FDM printers

Specificaties

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Vragen over dit artikel

How do I load the 1.75 mm spool onto my printer, and what step is often missed?

Mount the spool on the holder, thread the filament through the guide tube into the extruder, and pre-heat the hot end before pushing material through; skipping the pre-heat causes the drive gear to grind the filament.

What upkeep will the filament need after opening?

Store unused spools in the original vacuum-sealed bags with the included desiccant; if the material absorbs moisture, dry it at low heat before printing to prevent bubbles and poor layer adhesion.

What is the first limitation that appears during long prints?

Dimensional accuracy is held to ±0.03 mm, so extended runs may show slight diameter variation that can affect extrusion consistency on very large models.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.