Qnap
Qnap RAM4GDR4T0SO2666 4GB DDR4 2666 MHz SoDIMM desktop RAM
4GB DDR4 2666 MHz SoDIMM with Intel XMP 2.0 support and 260-pin form factor
- Capacity4GB
- BIOS/Performance ProfileIntel XMP 2.0
- Adds 4 GB of DDR4 memory for smoother multitasking
- Runs at 2666 MHz for responsive system performance
- Uses 260-pin SoDIMM form factor for compact builds
- Supports Intel XMP 2.0 profile for easy BIOS tuning
- Weighs only 1.23 oz to keep the system light
Qnap 4GB DDR4 SoDIMM
This Qnap module provides 4GB of DDR4 memory in a SoDIMM form factor for compact desktop systems. It operates at 2666 MHz with a PC4-21333 rating and includes an Intel XMP 2.0 profile for straightforward configuration.
260-pin SoDIMM build
The stick uses a standard 260-pin edge connector that slots directly into compatible SoDIMM sockets. Weighing approximately 1.23 oz, it adds minimal mass to the motherboard and requires no additional mounting hardware or cables for installation.
Low-profile thermal behaviour
With no heatsink or active cooling, the module relies on case airflow to manage heat during typical workloads. Power draw stays within standard DDR4 limits, and the absence of moving parts means it contributes no audible noise to the system.
Pluspunten
- Adds 4 GB of DDR4 memory for smoother multitasking
- Runs at 2666 MHz for responsive system performance
- Uses 260-pin SoDIMM form factor for compact builds
- Supports Intel XMP 2.0 profile for easy BIOS tuning
- Weighs only 1.23 oz to keep the system light
Specificaties
| Capacity | 4GB |
|---|---|
| BIOS/Performance Profile | Intel XMP 2.0 |
| Verzendgewicht | 0.45 kg |
| Pakketafmetingen | 170 × 69 × 28 mm |
Vragen over dit artikel
Does the DDR4-2666/PC4-21333 standard limit the module to 2666 MHz in practice?
Yes, the module is rated for 2666 MHz and the PC4-21333 designation confirms that maximum data rate.
Will the 260-pin SoDIMM form factor fit a standard desktop motherboard?
No, the 260-pin SoDIMM form factor is designed for laptops and small-form-factor systems, not full-size desktop DIMM slots.
How do I enable the Intel XMP 2.0 profile after installing the module?
Enter the system BIOS, locate the memory or overclocking section, select the XMP 2.0 profile, save changes and reboot to apply the 2666 MHz speed.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
US$ 104,99
0.00134829BTC
Op voorraad
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
US$ 7,99
0.00010261BTC
Op voorraad