Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Standard ATX power supply unit with single fan and matte metal finish

Replace Power

Replace Power RPMPS3420-7 400W ATX power supply

SKU CH-7237-31TCA MPN RPMPS3420-7

400 W ATX power supply replaces Bestec 0950-4107, ATX-1956D and ATX-300-12Z-CDR units with 20+4-pin and +12 V connectors, single-rail design and 115/230 V input

  • TypeATX
  • Fans1
  • Weight0.1
  • Delivers 400W continuous power for stable desktop operation
  • Single 12V rail supplies 16A for modern component compatibility
  • 20+4 pin main connector fits both 20-pin and 24-pin motherboards
  • Manual 115/230V input switch supports worldwide mains voltages
  • Replaces Bestec 0950-4107 and ATX-300-12Z-CDR units directly

400 W ATX replacement unit

This Replace Power RPMPS3420-7 is a 400 W ATX power supply designed to replace Bestec 0950-4107 ATX-1956D ATX-300-12Z-CDR units in older desktop PCs. It delivers power through a single-rail design with a 20+4-pin main connector and standard peripheral leads. One built-in fan provides cooling.

Suits owners of compatible legacy systems

It suits owners of Dell, HP or other desktops that originally shipped with the listed Bestec models and need a direct swap. Builders assembling new systems, or anyone requiring modular cables, higher wattage or modern efficiency ratings, should look elsewhere.

400 W total output with single +12 V rail

The unit supplies +12 V at 16 A, +3.3 V at 13 A and +5 V at 13 A, with -12 V at 0.8 A, -5 V at 0.5 A and +5 VSB at 2.5 A. Hold-up time is 17 ms minimum and rise time is under 70 ms. It will run out of headroom on builds that demand more than the rated 400 W or multiple high-current +12 V devices.

Pluspunten

  • Delivers 400W continuous power for stable desktop operation
  • Single 12V rail supplies 16A for modern component compatibility
  • 20+4 pin main connector fits both 20-pin and 24-pin motherboards
  • Manual 115/230V input switch supports worldwide mains voltages
  • Replaces Bestec 0950-4107 and ATX-300-12Z-CDR units directly

Specificaties

BrandReplace Power
ModelRPMPS3420-7
TypeATX
Fans1
Weight0.1

Vragen over dit artikel

What existing case and motherboard connectors does this 400W ATX unit need to fit and power the system?

It requires a standard ATX mounting opening and a motherboard with a 20+4 pin main connector plus a +12V auxiliary plug.

Will the single 12V rail delivering 16A support older components that expect split 12V rails?

Yes, the single +12V rail at 16A combines the current that older multi-rail designs separated, so legacy parts draw from the same pool.

How can I verify the supply is operating correctly once installed?

Measure the +3.3V, +5V and +12V outputs under load; they should stay within ATX tolerance, and the power-good signal must assert within 70 ms with at least 17 ms hold-up after AC loss.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.