Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR4 RDIMM with black chips and gold edge connectors

RIMLANCE

RIMLANCE RRD23400S4C16 16GB DDR4 2933 ECC Registered RDIMM

SKU CH-KM1T-D8712

16 GB DDR4 2933 ECC registered RDIMM for servers needing error-correcting memory

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity supports larger server workloads
  • DDR4 2933 speed enables fast data transfer
  • ECC registered design protects data integrity
  • 2 V operation reduces power consumption
  • CL21 latency balances timing and stability

Server Memory Upgrade

This RIMLANCE module is a 16GB DDR4 2933 ECC Registered RDIMM built for servers and workstations that require error-correcting memory. It uses a 288-pin form factor and operates at 1.2V with CL21 latency. The single-rank 1Rx4 design helps maintain signal integrity on populated memory channels.

Capacity And Speed Step

The module upgrades a system from lower-capacity or slower DDR4 RDIMMs by adding 16GB at 2933 MT/s while keeping registered buffering and ECC active. The jump is worth it when workloads exceed current memory headroom or when replacing non-ECC modules in a platform that mandates registered error correction. It does not fit desktop boards that accept only unbuffered DIMMs.

Installation Notes

Installation follows the standard 288-pin DDR4 keying; align the notch and press until the latches engage. Common issues arise when mixing registered and unbuffered DIMMs or when the BIOS lacks the latest microcode for 2933 operation. Verify the platform supports DDR4 registered memory before purchase.

Pluspunten

  • 16 GB capacity supports larger server workloads
  • DDR4 2933 speed enables fast data transfer
  • ECC registered design protects data integrity
  • 2 V operation reduces power consumption
  • CL21 latency balances timing and stability

Specificaties

BrandRIMLANCE
ModelRRD23400S4C16
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Vragen over dit artikel

Does the 288-pin DDR4 RDIMM require a registered-memory slot?

Yes, the module is a registered DDR4 RDIMM and must be installed in a server or workstation motherboard that supports registered ECC memory.

What is the correct orientation for seating the 288-pin module?

Align the notch on the gold edge connector with the key in the DDR4 slot, press down firmly until both side clips click into place.

When should the 16 GB CL21 ECC module be replaced?

Replace it if system logs report uncorrectable ECC errors, if memory diagnostics fail repeatedly, or when a capacity upgrade is required.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.