Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A short black cable with a USB 3.0 plug on one end and a 2.5 inch SATA connector on the other

Sabrent

Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter

SKU CH-3NJD-H1R1N

Connects a 2.5″ SATA drive to USB 3.0 at up to 5 Gbps with UASP support, hot-swap and an activity LED

  • ColorN/A
  • Cable Length4 In
  • Changer TypeUSB 3.0 to SSD/2.5''
  • Connector A1x USB 3.0 male
  • Connector B1x 2.5in SATA III
  • FeaturesUSB 3.0 to SSD 2.5 inch SATA Adapter Cable, User Manual
  • Connect 2.5" SATA drives via USB 3.0
  • Transfer data at up to 5Gbps speeds
  • Plug and play with no drivers required
  • LED shows power and activity status
  • Includes Acronis cloning software download

Connect 2.5" SATA drives via USB 3.0

This adapter links a 2.5 inch SATA I, II or III hard drive or solid-state drive to a USB 3.0 port. It suits users who need to access data from a laptop drive on a desktop, clone an old disk or recover files without opening a case. The connection is hot-swappable and requires no driver installation on modern operating systems.

Sustained transfers with UASP support

The adapter implements UASP to reduce command overhead during long copy or imaging sessions. USB 3.0 provides a 5 Gbps signalling rate, and the short 4 inch cable keeps signal loss low. An LED shows power and activity so you can monitor progress without guessing. Performance scales with the drive you attach rather than the adapter itself.

Compact cable with cloning software included

The 4 inch cable weighs 0.18 units and fits easily in a tool bag or drawer. Connectors are a USB 3.0 male plug and a 2.5 inch SATA III receptacle, both keyed for correct insertion. Reverse compatibility with USB 2.0 ports is supported. A free download of Acronis True Image for Sabrent is provided for straightforward disk cloning.

Pluspunten

  • Connect 2.5" SATA drives via USB 3.0
  • Transfer data at up to 5Gbps speeds
  • Plug and play with no drivers required
  • LED shows power and activity status
  • Includes Acronis cloning software download

Specificaties

BrandSABRENT
Part NumberEC-SSHD
ColorN/A
Cable Length4 In
Changer TypeUSB 3.0 to SSD/2.5''
Connector A1x USB 3.0 male
Connector B1x 2.5in SATA III
FeaturesUSB 3.0 to SSD 2.5 inch SATA Adapter Cable, User Manual
Weight0.18
Verzendgewicht0.08 kg
Pakketafmetingen188 × 135 × 3 mm

Vragen over dit artikel

Does the Sabrent EC-SSHD adapter get hot or draw much power when a 2.5" SATA SSD runs all day?

The adapter is a passive 4-inch cable with no active electronics, so it adds negligible heat and draws only the tiny USB 3.0 signalling current while the drive itself handles all power.

What must I already own to use this EC-SSHD adapter with a 2.5" SATA drive?

You need a computer with a USB 3.0 or USB 2.0 port and a standard 2.5" SATA I/II/III hard drive or SSD; the adapter cable and a user manual are included.

Will this Sabrent EC-SSHD work reliably with an older 2.5" SATA II drive I want to keep?

Yes, the SATA III connector is backwards compatible with SATA I and II drives, and the USB 3.0 interface falls back to USB 2.0 on legacy ports.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.