Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

SAMSUNG

SAMSUNG M393A4K40BB0-CPB 32GB DDR4-2133 2Rx4 LP ECC REG server RAM

SKU CH-X35S-7PKVJ MPN M393A4K40BB0-CPB

32 GB DDR4 server memory running at 2133 MHz with CL15 latency, ECC and registered operation at 1.20 V

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCECC
  • 32 GB capacity supports dense virtualisation workloads
  • DDR4-2133 speed delivers 17000 MB/s bandwidth
  • ECC registered design corrects errors for server reliability
  • CL15 latency at 1.20 V balances response and efficiency
  • 288-pin 2Rx4 low-profile form factor fits tight chassis

32 GB DDR4-2133 ECC Registered DIMM

This 32 GB DDR4-2133 module delivers error-correcting, registered memory for server platforms that require data integrity. It operates at 1.20 V with a CAS latency of CL15 and is organised as a dual-rank 2Rx4 configuration. The 288-pin DIMM targets enterprise workloads where stability outweighs raw frequency.

Low-profile installation in dense chassis

The low-profile height allows the stick to fit in 1U and blade systems where vertical clearance is tight. Alignment follows the standard 288-pin DDR4 keying; the module seats with even pressure until the retention clips engage. A common issue arises when the platform BIOS defaults to a higher voltage or disables ECC, preventing the system from posting.

Steady throughput under continuous load

Registered signalling reduces electrical load on the memory controller, helping sustain bandwidth during extended compute jobs. ECC detection and correction maintain data accuracy without halting the pipeline when single-bit errors occur. The CL15 timing at 2133 MHz provides predictable latency for virtualization and database tasks that run for hours rather than seconds.

Pluspunten

  • 32 GB capacity supports dense virtualisation workloads
  • DDR4-2133 speed delivers 17000 MB/s bandwidth
  • ECC registered design corrects errors for server reliability
  • CL15 latency at 1.20 V balances response and efficiency
  • 288-pin 2Rx4 low-profile form factor fits tight chassis

Specificaties

BrandSAMSUNG TECHWIN AMERICA
ModelM393A4K40BB0-CPB0
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCECC
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Features2Rx4
Verzendgewicht0.45 kg
Pakketafmetingen152 × 25 × 5 mm

Vragen over dit artikel

How can I confirm the module is running at the rated DDR4-2133 speed and CL15 latency after installation?

Enter the server BIOS or UEFI and open the memory information screen; it should report 2133 MHz, 1.20 V and CAS latency 15 for each installed module.

What is included with the M393A4K40BB0-CPB module and what must be sourced separately?

The box contains the 32 GB 288-pin DDR4 RDIMM only; no heat spreader, cables or additional hardware are supplied.

Which version of this Samsung DDR4 module should I choose for a registered ECC server configuration?

Select the M393A4K40BB0-CPB part number; it provides 32 GB, 2Rx4 organisation, registered ECC operation at DDR4-2133 CL15.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.