Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2.5 inch rectangular SSD with label showing Samsung PM1633a 7.68 TB SAS 12Gb/s

SAMSUNG

SAMSUNG PM1633a MZILS7T6HMLS-000D4 7.68 TB SAS 12Gb/s 2.5 internal SSD

SKU CH-KJ9X-Y0GKS

A 7.68 TB SAS internal SSD rated for 1 DWPD with 1,250 MB/s sequential read and write speeds

  • High-capacity 7.68 TB storage for large datasets
  • SAS 12Gb/s interface enables fast 1250 MB/s sequential reads
  • Read-intensive endurance rated at 1 DWPD for steady workloads
  • 200K IOPS random write performance handles heavy write streams
  • 5-inch form factor fits standard drive bays

Capacity and interface

The Samsung PM1633a is a 7.68 TB SAS 12Gb/s internal solid-state drive built for read-intensive workloads. It suits data-centre servers and storage arrays that need high-capacity flash with consistent sequential throughput.

Compatibility checks

Verify that your system provides a 2.5-inch bay and a SAS 12Gb/s backplane or controller; the drive uses a single SAS interface and measures 70 x 100 x 15 mm. Confirm the chassis can supply adequate airflow for a 140-gram unit and that your firmware supports 1 DWPD endurance.

Thermals noise and power

With no moving parts the SSD runs silently and generates minimal heat under normal read-intensive operation. Sequential read and write speeds reach 1250 MB/s while random 4 KB performance delivers 35k IOPS read and 200k IOPS write within the rated 2,000,000-hour MTBF.

Pluspunten

  • High-capacity 7.68 TB storage for large datasets
  • SAS 12Gb/s interface enables fast 1250 MB/s sequential reads
  • Read-intensive endurance rated at 1 DWPD for steady workloads
  • 200K IOPS random write performance handles heavy write streams
  • 5-inch form factor fits standard drive bays

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does the drive ship with a tray, cables or screws, or must those be purchased separately?

The listing shows the drive only. A 2.5-inch SAS tray and SAS data or power cables are not included and must be sourced separately for your server or enclosure.

Should I choose the 7.68 TB model or a smaller capacity for a read-intensive workload?

The 7.68 TB model delivers 1 DWPD and 1,250 MB/s sequential throughput. Select it when you need maximum capacity at that endurance level; pick a smaller capacity only if your dataset fits and you want lower cost per drive.

What does the 1,250 MB/s sequential read figure mean once the drive is installed in a server?

In a SAS 12 Gb/s backplane the drive can sustain up to 1,250 MB/s sequential reads and writes, with 35 k random read IOPS and 200 k random write IOPS at 4 KB block size.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.