SanDisk
SanDisk Optimus GX 7100M 1TB internal SSD SDSP71100TAT-000E0
- Internal Solid Stat…
- M.2 2230-S3-M
US$ 183,99
0.00232308BTC
Op voorraad
SanDisk
SanDisk Optimus GX 7100M 2TB internal SSD SDSP71200TAT-000E0
M.2 2230 2 TB drive with PCIe 4.0 x4 sequential speeds up to 7250/6900 MB/s and 1,000,000/1,300,000 random IOPS
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2230-S3-M
- Capacity2TB
- Memory Components3D NAND TLC
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe 2.0
Capacity 2TB
- 1TB
- 2TB
- Sequential reads up to 7250 MBps cut game load times
- Sequential writes up to 6900 MBps accelerate large file saves
- Random reads up to 1000000 IOPS sharpen system responsiveness
- Random writes up to 1300000 IOPS reduce in-game stutter
- 1200 TBW rating supports heavy write workloads
Capacity and form factor
The SanDisk Optimus GX 7100M is a 2TB internal SSD built on the M.2 2230-S3-M form factor. It uses 3D NAND TLC components and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive targets compact systems such as thin laptops, handheld consoles and small-form-factor PCs that need high-capacity storage in a 22mm by 30mm footprint.
Thermals and power
Idle power draw is rated at 5 mW while active read and write averages are 3.7W and 4.0W respectively. The operating temperature range spans 0°C to 85°C and the drive ships without a heatsink, relying on the host device's thermal solution. Shock resistance is specified at 1500G for 0.5 ms half-sine and vibration tolerance reaches 5 gRMS across three axes during operation.
Bundled software
SanDisk Dashboard for Windows provides firmware updates and a Game Mode toggle that optimises drive behaviour for gaming workloads. Acronis True Image for SanDisk enables full system migration onto the new SSD. Both utilities are supplied by the manufacturer and require a Windows environment to run.
Pluspunten
- Sequential reads up to 7250 MBps cut game load times
- Sequential writes up to 6900 MBps accelerate large file saves
- Random reads up to 1000000 IOPS sharpen system responsiveness
- Random writes up to 1300000 IOPS reduce in-game stutter
- 1200 TBW rating supports heavy write workloads
Specificaties
| Brand | SanDisk |
|---|---|
| Series | Optimus GX 7100M |
| Model | SDSP71200TAT-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2230-S3-M |
| Capacity | 2TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 7250 MBps |
| Max Sequential Write | Up to 6900 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 1,300,000 IOPS |
| Terabytes Written (TBW) | 1200TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 3.7W Average Active Power Write: 4.0W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 30mm |
| Weight | 2.8g |
| Verzendgewicht | 0.05 kg |
| Pakketafmetingen | 127 × 102 × 2 mm |
Andere versies van dit model
Nog 1 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Vragen over dit artikel
Will this M.2 2230-S3-M drive fit in a laptop that only accepts 2230 modules?
Yes, the 22mm width and 30mm depth match the 2230 form factor exactly.
What sequential read and write speeds can I expect from the PCIe 4.0 x4 interface?
Up to 7250 MBps read and 6900 MBps write under optimal conditions.
How much power does the drive draw during typical read and write workloads?
Average active power is 3.7W for reads and 4.0W for writes, with 5 mW at idle.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
