SanDisk
SanDisk X300s 512GB SATA 2.5-inch internal SSD
A 512 GB SATA internal SSD with MLC memory in a 2.5 inch form factor
- Device TypeInternal Solid State Drive (SSD)
- Weight3.0000
- 512GB capacity stores large workloads
- MLC technology increases write endurance
- SATA 6Gb/s interface enables fast data transfer
- 5-inch form factor fits standard drive bays
SanDisk X300s 512GB SATA SSD
The SanDisk X300s is a 512GB internal solid state drive that uses a SATA 6Gb/s interface and a 2.5-inch form factor. It employs multi-level cell flash memory for storage. This drive suits users upgrading a laptop or desktop that accepts a standard SATA storage device.
Installation notes and common issues
Installation requires a 2.5-inch drive bay and a SATA data plus power connection. The drive weighs 3.0000 units. Ensure the system BIOS is set to AHCI mode for proper operation. A frequent issue is the drive not appearing if the SATA cable is loose or the port is disabled in firmware.
Pluspunten
- 512GB capacity stores large workloads
- MLC technology increases write endurance
- SATA 6Gb/s interface enables fast data transfer
- 5-inch form factor fits standard drive bays
Specificaties
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Weight | 3.0000 |
Vragen over dit artikel
How do I confirm the SanDisk X300s 512GB is working as intended after installation?
The drive should appear in BIOS or OS disk management as a 512 GB SATA device and allow read/write operations without errors.
What is included with the SD7SB2Q-512G-1006 and what must be purchased separately?
The package contains the 2.5-inch SSD only; a SATA data cable, power cable and mounting bracket are not supplied.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
