Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Refurbished Seagate Cheetah 3.5 inch bare drive, silver metal casing, circuit board visible

Seagate

Seagate Cheetah ST3600057FC-FR 600GB 15000 RPM 16MB Fibre Channel 4Gb/s 3.5" internal hard drive

SKU CH-F6YJ-19NZ5 MPN ST3600057FC-FR

A refurbished 600 GB 3.5-inch drive spinning at 15 000 RPM with a 16 MB cache and 4 Gb/s Fibre Channel interface

  • PackagingBare Drive
  • InterfaceFibre Channel 4Gb/s
  • Capacity600GB
  • RPM15000 RPM
  • Cache16MB
  • Average Latency2ms
  • Mission-critical performance with 15000 RPM spindle speed
  • Fast data throughput via 4Gb/s Fibre Channel interface
  • 600GB capacity from third-generation perpendicular recording
  • 16MB cache accelerates read/write responsiveness
  • Seagate PowerTrim technology cuts idle power 62 percent

Refurbished 600GB 15K Fibre Channel Drive

This refurbished Seagate Cheetah ST3600057FC-FR is a 3.5-inch internal hard drive spinning at 15000 RPM with a 4Gb/s Fibre Channel interface. It offers 600GB capacity and 16MB cache for enterprise storage arrays and servers requiring high-throughput block access. The bare-drive unit uses third-generation perpendicular recording to reach sustained rates up to 204 MB/s.

Suited for Fibre Channel Arrays Not General PCs

This drive suits administrators maintaining or expanding existing Fibre Channel SANs, transaction-processing clusters or database tiers that demand 15K spindle speed and 2ms average latency. Builders without Fibre Channel host bus adapters, backplanes or multipath software cannot use the 4Gb/s interface and should select a different drive.

4Gb/s Fibre Channel Interface Decides Compatibility

The single specification that determines fit is the 4Gb/s Fibre Channel interface, which requires matching controllers, cables and enclosure slots. Without that infrastructure the 600GB capacity and 15000 RPM performance cannot be accessed, so verify the host environment before purchase.

Pluspunten

  • Mission-critical performance with 15000 RPM spindle speed
  • Fast data throughput via 4Gb/s Fibre Channel interface
  • 600GB capacity from third-generation perpendicular recording
  • 16MB cache accelerates read/write responsiveness
  • Seagate PowerTrim technology cuts idle power 62 percent

Specificaties

BrandSeagate
SeriesCheetah
ModelST3600057FC-FR
PackagingBare Drive
InterfaceFibre Channel 4Gb/s
Capacity600GB
RPM15000 RPM
Cache16MB
Average Latency2ms
FeaturesKey Advantages
- Third-generation perpendicular recording delivers up to 600GB
- Unprecedented performance with sustained data rate of up to 204 MB/s - a 16 percent increase over last generation
- Industry’s highest 3.5-inch drive reliability at 1.6-million-hours MTBF
- Seagate PowerTrim technology provides a 62 percent improvement in GBs/W at idle over typical 3.5-inch hard drives
- Read/write advances deliver nonrecoverable error rate of 1x10E16
- Available in 4 Gb/s FC or 6 Gb/s SAS interfaces (supports SAS 2.0 feature set)
- TCG-compliant Self-Encrypting Drive (SED) option cuts I
Form Factor3.5"
Height (maximum)1.0"
Width (maximum)4.0"
Length (maximum)5.76"
Verzendgewicht0.73 kg
Pakketafmetingen173 × 126 × 37 mm

Vragen over dit artikel

Will this 3.5" 600GB drive fit in the same hot-swap tray as my existing 3.5" Fibre Channel disks?

Yes, the drive uses the standard 3.5" form factor with 1.0" height, 4.0" width and 5.76" length, matching common enterprise trays.

Can I run this 15000 RPM drive on my older 2Gb/s Fibre Channel controller?

The 4Gb/s Fibre Channel interface is backwards compatible, so the drive will negotiate down to 2Gb/s and operate normally.

How can I verify the drive is delivering the rated 204MB/s sustained transfer after installation?

Run a sequential read test with a tool such as fio or CrystalDiskMark and confirm sustained throughput approaches 204MB/s.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.