Seagate
Seagate Exos X16 ST14000NM005G 14TB 3.5" SATA 7200 RPM 256MB enterprise internal hard drive
14 TB enterprise SATA drive with 7200 RPM, 256 MB cache and 2.5M-hour MTBF for high-capacity storage
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity14TB
- RPM7200 RPM
- Cache256MB
- UsageFor Enterprise Storage
- 14TB capacity for massive bulk storage
- 7200 RPM and 256MB cache for fast data access
- Helium-sealed design enables 550TB/yr workload rating
- 5M hour MTBF for enterprise-grade reliability
- SATA 6.0Gb/s interface fits standard 3.5" bays
Capacity and interface
This 14TB 3.5-inch enterprise hard drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM with a 256MB cache. It is built for nearline storage in servers and arrays where high capacity and consistent response rates are required. The helium-filled design helps lower power consumption per terabyte in dense deployments.
Who this suits and who should look elsewhere
It suits integrators building maximum-density racks that can accommodate the 25.4mm height and need a 550TB per year workload rating with a 2.5M-hour MTBF. It is not for desktop workloads that exceed the annual transfer limit or for bays that cannot accept a 3.5-inch form factor.
Deciding specification
The 550TB per year workload rate limit is the single figure that determines whether this drive matches the intended write intensity. Exceeding that threshold risks reduced reliability and falls outside the design envelope.
Pluspunten
- 14TB capacity for massive bulk storage
- 7200 RPM and 256MB cache for fast data access
- Helium-sealed design enables 550TB/yr workload rating
- 5M hour MTBF for enterprise-grade reliability
- SATA 6.0Gb/s interface fits standard 3.5" bays
Specificaties
| Brand | Seagate |
|---|---|
| Series | Exos X16 |
| Model | ST14000NM005G |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 14TB |
| RPM | 7200 RPM |
| Cache | 256MB |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 25.4mm |
| Width (maximum) | 101.6mm |
| Length (maximum) | 147.32mm |
Vragen over dit artikel
Will the 3.5-inch 25.4 mm high drive fit in a standard 3.5-inch bay?
Yes. The drive measures 25.4 mm high, 101.6 mm wide and 147.32 mm long, matching the standard 3.5-inch form factor used in most server and desktop bays.
Does the SATA 6.0Gb/s interface need any special cabling or jumper setting during installation?
No. Connect a standard SATA data cable and a SATA power connector; the drive has no jumpers and negotiates the 6.0Gb/s link automatically.
What workload can the helium-sealed 14TB mechanism sustain before a refresh is advisable?
The drive is rated for 550TB per year with a 2.5M-hour MTBF; plan a capacity review once annual writes approach that limit.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
