Seagate
Seagate ST4000NM0125 4 TB 3.5" SAS 7200 RPM 128 MB internal hard drive
A 4 TB 3.5-inch SAS internal hard drive spinning at 7200 RPM with a 128 MB cache
- InterfaceSAS 12Gb/s
- Capacity4TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Cache128MB
- Form Factor3.5"
- 4 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential throughput
- 128 MB cache buffers heavy write workloads
- SAS 12Gb/s interface supports dual-port redundancy
- 5 inch form factor fits standard drive bays
Enterprise Capacity Drive
The Seagate ST4000NM0125 is a 4TB 3.5-inch internal hard drive built for servers and storage arrays that require the SAS 12Gb/s interface. It spins at 7200 RPM with a 128MB cache to sustain heavy read and write workloads. The SLC NAND flash component supports data integrity features in demanding environments. This drive suits administrators who need high-capacity, enterprise-grade storage on a 12Gb/s SAS fabric.
Not For Direct Desktop Use
Systems without a SAS host bus adapter or backplane cannot connect this drive, so standard PC builders should look elsewhere. Laptop upgrades and small-form-factor enclosures are unsuitable due to the 3.5-inch form factor. Buyers who need a different interface protocol or a smaller physical size must choose another product.
Interface Is SAS 12Gb/s
The single specification that determines compatibility is the SAS 12Gb/s interface, which requires a matching controller or backplane. Without that connection the drive will not function in the target system. Verify the host hardware supports this interface before purchase.
Pluspunten
- 4 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential throughput
- 128 MB cache buffers heavy write workloads
- SAS 12Gb/s interface supports dual-port redundancy
- 5 inch form factor fits standard drive bays
Specificaties
| Brand | Seagate |
|---|---|
| Model | ST4000NM0125 |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Cache | 128MB |
| Form Factor | 3.5" |
Vragen over dit artikel
How much heat and noise does the ST4000NM0125 produce during continuous 7200 RPM operation?
The 3.5-inch drive spins at 7200 RPM with a SAS 12Gb/s interface; sustained enterprise workloads generate typical mechanical-drive heat and audible seek noise.
What host connector and controller does the ST4000NM0125 require to function?
It needs a 12 Gb/s SAS backplane or HBA with a compatible SAS cable; the drive uses a standard SAS data and power connector.
Can the ST4000NM0125 share a SAS backplane with older 6 Gb/s SAS drives?
Yes, the 12 Gb/s SAS interface auto-negotiates down to 6 Gb/s, so the 4 TB drive operates alongside legacy SAS devices on the same domain.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
