Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Seagate 4 TB 3.5 inch SAS hard drive silver aluminium casing

Seagate

Seagate ST4000NM0135Product 4 TB 7200 RPM SAS 12Gb/s 128 MB 512n 3.5" internal hard drive

SKU CH-C4MB-BSYPS MPN ST4000NM0135Product

A 4 TB 3.5-inch internal hard drive with 7200 RPM SAS 12Gb/s interface and 128 MB cache

  • NAND Flash Memory TypeSLC
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast data access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 128 MB cache improves burst performance

4 TB SAS 12Gb/s enterprise drive

This Seagate hard drive delivers 4 TB of storage on a 12 Gb/s SAS interface. It spins at 7200 RPM with a 128 MB cache and uses 512n sector formatting. The 3.5-inch form factor fits standard enterprise bays. It is built for servers and storage arrays that need consistent throughput.

Thermals noise and power in normal use

The drive operates within typical enterprise temperature limits during sustained workloads. Acoustic output remains low enough for rack-mounted environments. Power draw stays steady under sequential read and write patterns. These characteristics support continuous operation in multi-drive chassis.

Pluspunten

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast data access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 128 MB cache improves burst performance

Specificaties

BrandSeagate
NAND Flash Memory TypeSLC

Vragen over dit artikel

How do I install the ST4000NM0135 in a 3.5-inch drive bay and connect the SAS 12Gb/s interface?

Mount the 3.5-inch drive in the bay using four screws, attach the SAS data cable to the controller and the power connector to the PSU, then ensure the backplane or HBA is set to 12Gb/s mode.

What maintenance will the ST4000NM0135 need over its service life?

No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and replace the drive if the error rate rises or the 128MB cache shows consistent latency spikes.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.