Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Seagate

Seagate ST600MM0006 600GB 10000RPM SAS 2.5 internal hard drive

SKU CH-7ACJ-FNTDZ

A 2.5-inch SAS drive delivering 600 GB at 10,000 RPM with a 64 MB cache

  • 600 GB capacity stores large datasets
  • 10,000 RPM spindle delivers fast data access
  • 6 Gb/s SAS interface enables high-throughput transfers
  • 64 MB cache buffers burst workloads
  • 5-inch form factor fits dense server bays

Enterprise 600 GB SAS drive

The Seagate ST600MM0006 is a 2.5 inch SAS hard drive that spins at 10000 RPM and provides 600 GB of capacity. It targets servers and storage arrays that need fast, consistent access to transactional data.

Bare 2.5 inch form factor

The drive ships as a bare unit with a 6 Gb/s SAS connector and a 64 MB buffer. Its small footprint allows dense drive bays in rackmount chassis, while the dual-port SAS interface supports multipath redundancy for continuous operation.

SAS 6 Gb/s throughput ceiling

The 6 Gb/s link caps sustained transfer rates, so sequential workloads cannot exceed the bus bandwidth. Buyers who need higher throughput or larger single-drive capacities must look beyond this interface generation.

Pluspunten

  • 600 GB capacity stores large datasets
  • 10,000 RPM spindle delivers fast data access
  • 6 Gb/s SAS interface enables high-throughput transfers
  • 64 MB cache buffers burst workloads
  • 5-inch form factor fits dense server bays

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What does the SAS 6Gb/s interface cap in practice?

The SAS 6Gb/s link caps sustained throughput at about 600 MB/s.

What does the 2.5 inch SAS form factor need to fit or mount?

It needs a 2.5 inch drive bay or caddy with a SAS backplane or adapter.

How is the bare drive installed, and what step do people miss?

Slide it into the bay, connect the SAS data and power cables, then ensure the controller detects it in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.