Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
6U rackmount server chassis with 60 front hot-swap drive drawers

Shenzhen Junxiangcheng Technology Co.,

Shenzhen Junxiangcheng Technology Co., 6U Rackmount Server Chassis 60-Bay 12Gb/s Backplane

SKU CH-EGNW-7MR7S

A 6U rackmount server chassis holding sixty 3.5" hot-swap bays with a 12Gb/s expander backplane

  • Chassis TypeRackmount
  • Form Factor6U
  • 60 hot-swap 3.5" bays plus two 2.5" bays for massive density
  • 12 Gb/s expander backplane with Mini-SAS HD SFF-8643 interface
  • Seven 12038 and four 8038 hot-swap ball fans deliver high airflow
  • Supports E-ATX boards up to 13.68" × 13" and seven half-height PCIe slots
  • 0 mm SGCC zinc-coated steel chassis fits standard 19" 6U racks

Chassis Capacity and Form Factor

This 6U rackmount server chassis provides 60 hot-swappable 3.5-inch drive bays plus two internal 2.5-inch bays, delivering high-density storage in a standard 19-inch rack footprint. The 12Gb/s expander backplane uses Mini-SAS HD (SFF-8643) connectivity for SAS and Sata drives. It suits organisations building dense storage nodes for cloud, big data or surveillance workloads.

Target Builds and Constraints

The design fits E-ATX and EE-ATX motherboards up to 13.68 by 13 inches and offers seven half-height PCIe expansion slots for controllers or networking cards. Cooling is handled by six hot-swap 12038 fans plus four 8038 fans, all mounted in a 1.0 mm SGCC steel frame with anti-EMI drive drawers. Builds needing full-height cards, more than seven slots, or a backplane interface other than 12Gb/s or 6Gb/s SAS/Sata will not match this platform.

Deciding Specification

The single specification that determines fit is the 12Gb/s expander backplane with Mini-SAS HD (SFF-8643) ports, which sets the drive interface speed and cabling for all 60 hot-swap bays. If the host controller or cabling uses a different interface or speed, the chassis cannot operate as intended.

Pluspunten

  • 60 hot-swap 3.5" bays plus two 2.5" bays for massive density
  • 12 Gb/s expander backplane with Mini-SAS HD SFF-8643 interface
  • Seven 12038 and four 8038 hot-swap ball fans deliver high airflow
  • Supports E-ATX boards up to 13.68" × 13" and seven half-height PCIe slots
  • 0 mm SGCC zinc-coated steel chassis fits standard 19" 6U racks

Specificaties

Chassis TypeRackmount
Form Factor6U

Vragen over dit artikel

How often should the twelve hot-swap fans be inspected or replaced?

The chassis uses six 12038 and four 8038 ball-bearing fans; plan a visual check every six months and replace any unit that shows bearing noise or reduced airflow.

Which component reaches its thermal or throughput ceiling first when all sixty 3.5-inch bays run continuously?

The 12Gb/s expander backplane with its temperature-control chipset will hit its sustained-throughput limit before the SGCC steel structure or the CRPS power supplies become a bottleneck.

What is the typical acoustic and thermal profile when the chassis operates twenty-four hours a day?

Ten high-speed ball fans move large air volumes through the 650 mm depth, so expect noticeable fan noise and a steady exhaust temperature that the backplane's temperature-control chipset actively monitors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.