Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3 UDIMM modules with gold contacts on a plain background

Simmtec, Inc

Simmtec, Inc 16GB (4x4GB) DDR3-1333MHz PC3-10600 NON-ECC UDIMM 2Rx8 desktop RAM

SKU CH-7KX4-4JCBD

16 GB desktop memory kit with four 4 GB DDR3-1333 modules running at 1.35 V or 1.5 V

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • 16 GB kit with four 4 GB modules for easy capacity upgrades
  • DDR3 1333 speed rated at PC3 10600 for responsive desktop performance
  • Dual-voltage 1.35 V and 1.5 V operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design suits mainstream consumer motherboards

Desktop DDR3 Kit

This kit provides 16 GB of DDR3 memory in four 4 GB unbuffered UDIMM modules running at 1333 MT/s. It targets desktop builders who need a straightforward capacity increase for everyday workloads on platforms that accept 240-pin DDR3 DIMMs.

Upgrade from smaller DDR3 sets

Replacing a 4 GB or 8 GB DDR3 configuration with this 16 GB kit is worthwhile when the motherboard has four slots and the operating system can address the full amount. The jump makes sense for multitasking, light virtualization or older workstations that still rely on DDR3 architecture.

Simple DIMM installation

Align each module with the 240-pin slot, press down until the retention clips click, and verify the system posts at 1333 MT/s. Common issues include mixing voltages when the board only supports 1.5 V, seating modules incompletely, or exceeding the board's maximum supported capacity per slot.

Pluspunten

  • 16 GB kit with four 4 GB modules for easy capacity upgrades
  • DDR3 1333 speed rated at PC3 10600 for responsive desktop performance
  • Dual-voltage 1.35 V and 1.5 V operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design suits mainstream consumer motherboards

Specificaties

Capacity16GB (4 x 4GB)
SpeedDDR3 1333 (PC3 10600)

Vragen over dit artikel

Will the 240-pin DDR3 modules fit my desktop motherboard?

The kit contains four 240-pin DDR3 UDIMMs; they install in standard desktop DDR3 slots.

What is the correct way to seat all four sticks?

Open the retention clips, align the notch on each module with the slot key, press down firmly until both clips click shut.

When should a module be replaced?

Replace any stick that causes repeated boot failures or memory errors after testing it individually in a known-good slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.