Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with black memory chips and gold edge connectors

SK hynix

SK hynix 8GB DDR3 1600 CL11 Desktop RAM

SKU CH-VAQB-ST6BW

An 8 GB DDR3 desktop module running at 1600 MHz with CL11 latency for standard system upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • 8 GB capacity for smoother multitasking
  • DDR3 1600 speed moves data quickly
  • CL11 latency keeps response times low
  • 5 V operation reduces power draw
  • 240-pin DIMM fits standard desktop slots

8GB DDR3 1600 CL11 DIMM for desktop upgrades

This is an SK hynix 8GB DDR3 1600 (PC3 12800) unbuffered DIMM built for desktop computers. It runs at 1.5 V with a CAS latency of CL11 and uses a 240-pin connector. The module is organised as 2Rx8 with 512M x 8 components. It is sold new and ready for installation.

Suits owners of DDR3 systems that accept 1600 MHz

Builders whose motherboards require a different DDR generation, registered or ECC modules, or a voltage other than 1.5 V should look elsewhere. Systems limited to speeds below 1600 MHz may not run this module at its rated frequency. Buyers needing more than 8GB per slot must choose higher-capacity sticks.

240-pin DDR3 interface determines physical

The 240-pin DDR3 form factor is the single specification that decides whether this module fits the motherboard slot. A board wired for any other memory generation will not accept this DIMM. Verify the motherboard manual or existing RAM part number before purchase.

Pluspunten

  • 8 GB capacity for smoother multitasking
  • DDR3 1600 speed moves data quickly
  • CL11 latency keeps response times low
  • 5 V operation reduces power draw
  • 240-pin DIMM fits standard desktop slots

Specificaties

Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11

Vragen over dit artikel

How much power does the 1.5 V DDR3 1600 module draw under continuous load?

The module operates at 1.5 V, the standard voltage for DDR3 1600, keeping power draw and heat low during all-day use.

What motherboard slot and chipset do I need to run this 240-pin DIMM?

You need a desktop board with a DDR3 240-pin slot; the memory controller must support 1600 MT/s and 1.5 V unbuffered operation.

Will this CL11 stick run stably alongside my existing CL9 DDR3 1600 modules?

The system will run all modules at the slowest common timing, so the CL11 stick will operate at CL9 speed if the other modules allow it.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.