Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connectors

SK hynix

SK hynix HMABAGR7A4R4N-VN 128GB DDR4-2666 ECC Registered Octal Rank server RAM

SKU CH-QCAK-QGP6T

A 128 GB DDR4-2666 registered ECC module with octal-rank organisation for high-density server memory configurations

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • ECCYes
  • Buffered/RegisteredRegistered
  • 128 GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rate
  • ECC registered design protects data integrity
  • Octal rank architecture maximises module density
  • 288-pin DDR4 form factor fits standard server slots

128GB DDR4-2666 ECC Registered Server Memory

This 128GB module uses 288-pin DDR4 SDRAM rated at 2666 MT/s with PC4-21300 bandwidth. It targets servers and workstations that require error-correcting code and registered signal buffering for high-density configurations.

Installation notes and common issues

The module plugs into standard 288-pin DDR4 RDIMM slots and is keyed to prevent misalignment. Builders must verify that the platform supports octal-rank registered DIMMs and the CL19 latency profile, otherwise the system may fail to post or cap usable capacity.

Octal rank density constraint

Octal rank organisation allows 128GB in a single stick but increases electrical load on the memory controller. Platforms limited to dual-rank or quad-rank modules cannot use this part, so the rank count is the decisive compatibility filter.

Pluspunten

  • 128 GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rate
  • ECC registered design protects data integrity
  • Octal rank architecture maximises module density
  • 288-pin DDR4 form factor fits standard server slots

Specificaties

BrandHynix
Part NumberHMABAGR7A4R4N-VN
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
ECCYes
Buffered/RegisteredRegistered

Vragen over dit artikel

How can I confirm the 128GB DDR4-2666 module is running at the correct CL19 latency after installation?

Enter the system BIOS or UEFI and verify the memory frequency reads 2666 MT/s with CAS latency set to 19; the registered ECC design also allows the OS to report corrected error counts, confirming active ECC operation.

What comes with the HMABAGR7A4R4N-VN module and what must I source separately?

The box contains the single 128GB 288-pin DDR4 registered DIMM; you must provide a compatible server or workstation motherboard with DDR4 RDIMM slots and a CPU that supports octal-rank registered memory.

Which capacity and rank version should I choose for a server needing maximum density per slot?

This part is a single 128GB octal-rank DDR4-2666 registered module; choose it when your platform supports octal-rank RDIMMs and you need the highest capacity per 288-pin slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.