Solidigm
Solidigm D3-S4620 480GB 2.5in SATA enterprise SSD SSDSC2KG480GZ1Z
- 2.5"
- 480GB
US$ 796,99
0.01028839BTC
Op voorraad
Solidigm
Solidigm D3-S4620 960GB 2.5" SATA enterprise SSD SSDSC2KG960GZ1Z
A 2.5-inch SATA enterprise SSD with 960GB of 144-layer TLC 3D NAND, up to 550 MBps read and 510 MBps write, plus 4.0 DWPD endurance
- Form Factor2.5"
- Capacity960GB
- Memory Components144L TLC 3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 550 MBps
- Max Sequential WriteUp to 510 MBps
- Sustained reads up to 550 MBps for fast data access
- Consistent writes up to 510 MBps to keep workloads moving
- Random read performance up to 90000 IOPS for responsive applications
- High endurance at 4.0 DWPD and 7.1 PBW for heavy write cycles
- Low idle power of 1.3W to reduce server energy draw
Enterprise SATA SSD for data centres
The Solidigm D3-S4620 is a 2.5 inch SATA III drive built with 144L TLC 3D NAND and rated at 960GB capacity. It targets servers and storage arrays that need consistent read and write performance within a standard SATA backplane.
Sustained write behaviour
Sequential writes reach up to 510 MBps while random writes hit up to 54,000 IOPS, backed by an endurance rating of 4.0 DWPD and 7.1 PBW. Active power draw stays at 3.2W and the drive operates from 0°C to 70°C, so thermal throttling is unlikely during continuous workloads.
Compatibility checks
Verify the host has a 2.5 inch SATA 6Gb/s bay and that the operating system supports TRIM for TLC NAND. The drive weighs 63.3g and withstands 1,000 G shock at 0.5 msec, so mounting hardware must secure it against vibration in rack environments.
Pluspunten
- Sustained reads up to 550 MBps for fast data access
- Consistent writes up to 510 MBps to keep workloads moving
- Random read performance up to 90000 IOPS for responsive applications
- High endurance at 4.0 DWPD and 7.1 PBW for heavy write cycles
- Low idle power of 1.3W to reduce server energy draw
Specificaties
| Brand | Solidigm |
|---|---|
| Model | D3-S4620 |
| Part Number | SSDSC2KG960GZ1Z |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 510 MBps |
| 4KB Random Read | Up to 90,000 IOPS |
| 4KB Random Write | Up to 54,000 IOPS |
| Endurance | Up to 4.0 DWPD / Up to 7.1 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1.3W |
| Power Consumption (Active) | 3.2W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 63.3g |
| Verzendgewicht | 0.09 kg |
| Pakketafmetingen | 140 × 108 × 19 mm |
Andere versies van dit model
Nog 3 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Solidigm
Solidigm D3-S4620 1.92TB 2.5in SATA enterprise SSD SSDSC2KG019TZ1Z
- 2.5"
- 1.92TB
US$ 1.505,99
0.01944091BTC
Op voorraad
Solidigm
Solidigm D3-S4620 3.84TB 2.5in SATA enterprise SSD SSDSC2KG038TZ1Z
- 2.5"
- 3.84TB
US$ 3.116,99
0.0402374BTC
Op voorraadVragen over dit artikel
What are the idle and active power figures for the D3-S4620 960GB during continuous operation?
The drive draws 1.3W at idle and 3.2W when active, with an operating temperature range of 0°C to 70°C.
Does the 2.5" SATA III D3-S4620 need any adapter or caddy to install in a standard drive bay?
It fits directly into any 2.5" SATA bay using the standard SATA data and power connectors; no adapter is required.
Will the D3-S4620 work alongside older SATA II drives on the same controller?
Yes, the SATA III interface is backward compatible with SATA II ports, though sequential speeds will be limited to the older link rate.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
