Solidigm
Solidigm D7-P5810 SSDPF2SQ800GZ01 800GB enterprise SSD
- U.2 15mm
- 800GB
US$ 2.804,99
0.03504529BTC
Op voorraad
Solidigm
Solidigm D7-P5810 SSDPF2SQ016TZ01 1.6TB U.2 15mm enterprise SSD
A 1.6TB U.2 15mm enterprise SSD delivering 6800 MBps sequential read and 4300 MBps write with 50 DWPD endurance
- Form FactorU.2 15mm
- Capacity1.6TB
- Memory Components144L TLC 3D NAND
- InterfacePCI-Express 4.0
- Max Sequential ReadUp to 6800 MBps
- Max Sequential WriteUp to 4300 MBps
- PCIe 4.0 x4 interface delivers up to 6800 MBps sequential read
- 6 TB capacity with 144-layer TLC 3D NAND for dense storage
- 50 DWPD endurance rating supports 146 PBW of writes
- 930,000 random read IOPS at QD256 for heavy workloads
- 2,000,000-hour MTBF ensures long-term reliability
Solidigm D7-P5810 1.6TB U.2 enterprise SSD
The Solidigm D7-P5810 is a 1.6TB U.2 15mm enterprise SSD built on 144L TLC 3D NAND with a PCI-Express 4.0 x4 interface. It is designed for data-centre and server workloads that demand sustained high throughput and strict latency targets.
50 DWPD endurance and 146 PBW headroom
Rated at 50 drive writes per day and 146 petabytes written, the drive delivers 930,000 random read IOPS and 510,000 random write IOPS at QD256. Sequential speeds reach 6800 MBps read and 4300 MBps write, so heavy mixed workloads stay within the endurance budget while lighter duties leave ample reserve.
U.2 15mm form factor fits 2.5-inch bays
The 15mm z-height occupies a standard 2.5-inch U.2 slot and draws 5W idle and 14W active. Operating temperature spans 0°C to 70°C with 1,000 G shock and 2.17 GRMS vibration ratings, so the SSD integrates into existing hot-swap backplanes without extra cooling or mounting hardware.
Pluspunten
- PCIe 4.0 x4 interface delivers up to 6800 MBps sequential read
- 6 TB capacity with 144-layer TLC 3D NAND for dense storage
- 50 DWPD endurance rating supports 146 PBW of writes
- 930,000 random read IOPS at QD256 for heavy workloads
- 2,000,000-hour MTBF ensures long-term reliability
Specificaties
| Brand | Solidigm |
|---|---|
| Model | D7-P5810 |
| Part Number | SSDPF2SQ016TZ01 |
| Form Factor | U.2 15mm |
| Capacity | 1.6TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 6800 MBps |
| Max Sequential Write | Up to 4300 MBps |
| 4KB Random Read | 930,000 (4K, QD256) |
| 4KB Random Write | 510,000 (4K, QD256) |
| Endurance | 50 DWPD / 146 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 14W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 154g |
| Verzendgewicht | 0.17 kg |
| Pakketafmetingen | 140 × 110 × 17 mm |
Andere versies van dit model
Nog 2 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Solidigm
Solidigm SSDPF2SQ032TZ01 D7-P5810 3.2TB U.2 15mm enterprise SSD
- U.2 15mm
- 3.2TB
US$ 8.913,99
0.11137058BTC
Op voorraadVragen over dit artikel
Will the U.2 15mm form factor fit in a 2.5-inch bay with a PCIe 4.0 backplane?
Yes, the drive uses a U.2 15mm form factor designed for 2.5-inch bays and connects via a PCIe 4.0 x4 interface, so it will work with a compatible backplane.
How can I verify the SSD is delivering the rated 930,000 random read IOPS after installation?
Run a 4K random read test at queue depth 256 using a tool such as FIO; sustained results near 930,000 IOPS confirm the drive is performing to spec.
Does the single pack include a heatsink or mounting screws, or must I source them separately?
The single pack contains only the SSD; any heatsink, carrier or mounting screws required by your server chassis must be purchased separately.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
