Solidigm
Solidigm SSDPFUKX019T1OZ D7-P5520 1.92TB E1.S PCIe 4.0 x4 enterprise SSD
E1.S enterprise SSD with 1.92TB capacity, PCIe 4.0 x4 interface and 3.5 PBW endurance for data-centre workloads
- Form FactorE1.S
- Capacity1.92TB
- Memory Components3D NAND TLC
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 5300 MBps
- Max Sequential WriteUp to 1900 MBps
- High sequential read speed up to 5300 MBps
- High random read performance up to 706000 IOPS
- Low write latency of 15 µs for fast response
- High endurance rating of 3.5 PBW for long life
- E1.S 9.5 mm form factor fits dense server chassis
Enterprise SSD for read-intensive workloads
The Solidigm D7-P5520 delivers 1.92TB of 3D NAND TLC storage in an E1.S form factor. It connects via PCIe 4.0 x4 and reaches up to 5300 MBps sequential read and 1900 MBps sequential write. Random read performance hits 706000 IOPS while random write reaches 114000 IOPS. The drive is rated for 3.5 PBW endurance and a 2000000 hour MTBF.
Verify E1.S slot and power budget
Confirm your server or storage array accepts the E1.S 9.5mm form factor before ordering. The drive draws 5W idle and 13W active, so ensure the backplane and power supply can sustain that load. Operating temperature spans 0°C to 70°C, so airflow must keep the device within this range. No other interface or connector types are supported.
E1.S hot-plug design with enterprise resilience
The 72g E1.S module is built for front-loading hot-plug bays, allowing replacement without system shutdown. It withstands 1000 G shock at 0.5 msec and 2.17 GRMS operating vibration from 5 to 700 Hz. Non-operating vibration tolerance reaches 3.13 GRMS from 5 to 800 Hz. Low latencies of 75µs read and 15µs write support consistent quality of service.
Pluspunten
- High sequential read speed up to 5300 MBps
- High random read performance up to 706000 IOPS
- Low write latency of 15 µs for fast response
- High endurance rating of 3.5 PBW for long life
- E1.S 9.5 mm form factor fits dense server chassis
Specificaties
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Part Number | AA002012B |
| Form Factor | E1.S |
| Capacity | 1.92TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 5300 MBps |
| Max Sequential Write | Up to 1900 MBps |
| 4KB Random Read | Up to 706,000 IOPS |
| 4KB Random Write | Up to 114,000 IOPS |
| Read Latency | 75µs |
| Write Latency | 15µs |
| Endurance | 3.5 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 13W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 72g +/- 5g |
| Verzendgewicht | 0.20 kg |
| Pakketafmetingen | 160 × 120 × 30 mm |
Vragen over dit artikel
What comes in the single pack and does the E1.S drive need a separate tray or heatsink?
The single pack contains the E1.S drive only; trays or heatsinks are not included and must be sourced separately.
Should I pick the 1.92TB D7-P5520 or a different capacity for mixed read-write workloads?
The 1.92TB model delivers up to 5300 MBps read and 1900 MBps write with 3.5 PBW endurance, matching the series specifications for this capacity.
How does the 706000 IOPS random read figure translate when the drive is installed in a PCIe 4.0 x4 server slot?
In a PCIe 4.0 x4 slot the drive can sustain up to 706000 IOPS random read at 75µs latency, provided the platform supplies adequate power and cooling.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
