Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact square CPU cooler with black fin stack and centred 80 mm PWM fan

STCI Tech LTD

STCI Tech LTD CPU Air Cooler FA08025M12LPA 80×80×25mm 12V .45A 4-Pin PWM Hydraulic

SKU CH-DBD4-K6GTZ

80 mm PWM hydraulic fan with heatsink for 12 V CPU cooling

  • TypeFan & Heatsinks
  • Compact 80×80×25 mm footprint fits tight builds
  • 12 V 0.45 A PWM fan enables precise speed control
  • Hydraulic bearing runs quietly under load
  • Integrated heatsink draws heat away from the CPU

Compact 80 mm PWM CPU cooler

The STCI Tech LTD FA08025M12LPA combines an 80×80×25 mm heatsink with a 12 V 0.45 A hydraulic-bearing fan. Four-pin PWM control adjusts speed automatically based on processor temperature. It suits small-form-factor builds that need active cooling in a tight footprint.

Straightforward clip mounting with PWM wiring

The cooler attaches using standard clips that fit common Intel and AMD retention brackets. Connect the 4-pin header to the motherboard for automatic speed curves. Builders who need higher thermal capacity or a larger fan diameter should consider a taller tower design instead.

Pluspunten

  • Compact 80×80×25 mm footprint fits tight builds
  • 12 V 0.45 A PWM fan enables precise speed control
  • Hydraulic bearing runs quietly under load
  • Integrated heatsink draws heat away from the CPU

Specificaties

TypeFan & Heatsinks

Vragen over dit artikel

How can I confirm the fan is spinning at the correct PWM speed after installation?

Connect the 4-pin header to the motherboard and monitor RPM in BIOS or fan-control software; the hydraulic bearing should run quietly at the reported speed.

What comes in the box with the FA08025M12LPA cooler and what must I supply myself?

The package includes the 80×80×25 mm fan and heatsink assembly; you will need to provide thermal paste and ensure a compatible 12 V 4-pin PWM header on the motherboard.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.