Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 70mm blower fan with 3-pin connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd TYF350LJ01 70mm 12V 0.35A 3-pin blower CPU cooler

SKU CH-CCR5-Y3A50

70 mm blower fan with ball bearing, 12 V 0.35 A 3-pin connector, 4.2 W power draw for projector or compact case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • Blower design directs airflow through tight spaces
  • 70 mm frame fits compact chassis and projectors
  • Ball bearing ensures durable continuous operation
  • 12 V 0.35 A draws only 4.2 W power
  • Three-pin connector enables speed monitoring control

Compact 70 mm blower fan

The SunnyStar TYF350LJ01 is a 70 mm square blower fan designed for tight enclosures such as DLP projectors and small-form-factor cases. It runs on 12 V and draws 0.35 A for 4.2 W of power through a 3-pin connector. Ball bearings provide consistent rotation in the black frame.

Suited for projector and slim-case cooling

This unit fits builders replacing a 7025-size blower in projector housings or compact chassis where a radial airflow pattern is required. It is not for systems that need a 4-pin PWM header or a larger mounting footprint. Buyers wanting temperature-controlled speed curves should look elsewhere.

3-pin fixed-voltage connector

The 3-pin power connector delivers constant 12 V supply without PWM signalling, so fan speed stays fixed unless the motherboard or controller supports voltage regulation. Verify that the target device accepts a 3-wire 70 mm blower with 7025 mounting centres before ordering.

Pluspunten

  • Blower design directs airflow through tight spaces
  • 70 mm frame fits compact chassis and projectors
  • Ball bearing ensures durable continuous operation
  • 12 V 0.35 A draws only 4.2 W power
  • Three-pin connector enables speed monitoring control

Specificaties

ModelTYF350LJ01
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin

Vragen over dit artikel

Will the 70mm blower fit a 70mm x 25mm mounting cut-out?

The fan measures 70mm square by 25mm thick, so it matches a standard 70mm x 25mm mounting pattern.

Which way does the 3-pin connector key align when plugging it into a 12V header?

The three-pin plug has a key tab that lines up with the header notch; press straight down until the latch clicks to avoid bent pins.

How often should the ball-bearing blower be cleaned to maintain 4.2W airflow?

Use compressed air to clear dust from the blower wheel and vents every six to twelve months; the sealed ball bearing needs no lubrication.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.