Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black flatbed SATA duplicator with 11 drive slots and LCD screen

Systor

Systor 1:11 SATA Hard Drive Duplicator & Sanitizer 150MB/s 600W

SKU CH-0XVR-TAVVJ

Copies and sanitises up to eleven SATA drives at 150 MB/s with DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 11
  • ControllerSystor Systems, Inc
  • Buffer Memory128 MB
  • Data Transfer Rate150MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

DATA TRANSFER RATE Flatbed - 9.0GB/min [150MB/sec]

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

TARGET SIZE 1 to 11

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Copies up to 11 drives simultaneously from one source
  • Standalone operation with LCD control, no PC required
  • 150 MB/s transfer rate speeds large-volume duplication
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Accepts 2.5" and 3.5" SATA drives without adapters

Standalone 1-to-11 SATA Duplicator

The Systor duplicator copies or erases up to eleven SATA drives at once without a host computer. It accepts both 3.5 and 2.5 inch drives directly in its slot-load bays. An LCD screen and multilingual menus guide the operator through copy and sanitize tasks.

150 MB/s throughput with 128 MB buffer

Each target port can sustain up to 150 MB/s while the 128 MB buffer smooths burst traffic across all eleven channels. Whole-media mode copies every sector including empty space, so time scales with drive capacity. System-and-files mode copies only used areas, reducing time on partially filled drives.

Dual 300 W supplies and per-bay cooling

Two 300 W units share the 600 W load across 115 V or 230 V mains at 50 Hz or 60 Hz. Rear 40 mm fans plus a dedicated outtake fan per bay move air through the chassis during long jobs. The standalone design means no software installation or host hardware is required.

Pluspunten

  • Copies up to 11 drives simultaneously from one source
  • Standalone operation with LCD control, no PC required
  • 150 MB/s transfer rate speeds large-volume duplication
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Accepts 2.5" and 3.5" SATA drives without adapters

Specificaties

BrandSystor
Model662712130491
TypeHard Drive Duplicator
Target1 to 11
ControllerSystor Systems, Inc
Buffer Memory128 MB
Data Transfer Rate150MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)
Package Contentssee pictures for details

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the duplicator accept the 3.5" and 2.5" SATA drives I already own without extra adapters?

Yes, the unit supports both 3.5" and 2.5" SATA hard drives and SSDs natively, so your existing drives fit directly into the eleven target bays.

How can I verify the duplicator is copying at the rated 150MB/s after setup?

The LCD screen displays real-time copy progress and speed; watch it during a Whole Media or System and Files job to confirm the transfer rate reaches the specified 150MB/s.

What comes in the box and what must I purchase separately?

The package includes the duplicator with dual 300W power supplies and 40mm cooling fans; you only need to supply your own source and target SATA drives.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.