Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black standalone SATA duplicator with LCD display and dual hot-swap slots for 2.5 and 3.5 drives

Systor

Systor SYS201HS-DP 1:1 SATA duplicator 150MB/s 128MB buffer

SKU CH-74NX-CTWNP MPN SYS201HS-DP

Standalone SATA duplicator copies and erases 2.5 and 3.5 drives at up to 150 MB/s with 128 MB buffer and DoD-compliant sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 1
  • Buffer Memory128 MB
  • Data Transfer RateUp to 150MB/s (Depending on HDD speed)
  • DisplayLCD display
  • Operating TypeStandalone

TARGET SIZE 1 to 01

  • 1 to 01
  • 1 to 03
  • 1 to 05
  • 1 to 07
  • 1 to 09
  • 1 to 11
  • 1 to 15
  • 1 to 16
  • 1 to 19
  • 1 to 20
  • 1 to 23
  • 1 to 24

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • 5.4GB/min [90MB/sec]
  • 9.0GB/min [150MB/sec]
  • 18.0GB/min [300MB/sec]
  • 36.0GB/min [600MB/sec]

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Standalone operation with no computer required
  • Up to 150 MB/s transfer rate depending on drive speed
  • 128 MB buffer memory for reliable copying
  • DoD 5220.22-M compliant erase for secure sanitisation
  • Supports 2.5" and 3.5" SATA drives without adapters

Standalone 1:1 SATA duplicator

The Systor SYS201HS-DP is a standalone 1:1 SATA duplicator and sanitiser that copies or erases 2.5 and 3.5 inch drives without a host computer. A 128 MB buffer and an LCD interface let operators start sector-by-sector cloning or multi-pass wiping with a single button press. It accepts both SSDs and HDDs directly in its hot-swap slots.

Upgrade from PC-based cloning

This unit replaces software-dependent workflows that tie up a workstation and limit throughput to a single stream. The jump is worth it when you need simultaneous copy and erase cycles on bare drives, DoD 5220.22-M compliant sanitisation, or completely driver-free operation in a forensic or IT refresh environment.

Sustained 150 MB/s with active cooling

Dual 40 mm rear fans and per-bay outtake fans maintain airflow during extended sessions, while the 80 W 115/230 V supply supports continuous duty. Transfer rates hold up to 150 MB/s depending on the installed drive speed, so large-volume jobs complete without thermal throttling or buffer overruns.

Pluspunten

  • Standalone operation with no computer required
  • Up to 150 MB/s transfer rate depending on drive speed
  • 128 MB buffer memory for reliable copying
  • DoD 5220.22-M compliant erase for secure sanitisation
  • Supports 2.5" and 3.5" SATA drives without adapters

Specificaties

BrandSystor
ModelSYS201HS-DP
TypeHard Drive Duplicator
Target1 to 1
Buffer Memory128 MB
Data Transfer RateUp to 150MB/s (Depending on HDD speed)
DisplayLCD display
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesGeneral Features:
Fits both 3.5" and 2.5" hard drives without the use of an adapter
Complete standalone duplicator, NO software or computer required
User-friendly LCD display interface.
Easy operation without extra hardware, software and training are required.
Self diagnostics when power on.
Copy, Compare HDD, PreScan, DoD Compliant Erase functions.
Can copy 3.5" and 2.5" hard drives.
HDD Sanitization/Eraser Features:
DoD 5220.22-M Data Sanitation Compliant
Secure Erase: Deletes and replace the entire hard drive data with zero strings.
Permanently wipes sensitive data to counter data
Power Supply115/230 V, 50/60 Hz, 80 W
Package Contentssee pictures for details
Verzendgewicht5.15 kg
Pakketafmetingen389 × 305 × 293 mm

Vragen over dit artikel

What drive sizes fit the Systor SYS201HS-DP duplicator bays without an adapter?

Both 3.5" and 2.5" hard drives fit directly into the slot-load bays without any adapter.

How is the Systor SYS201HS-DP installed and what step do users often miss?

Connect the 115/230 V power supply, insert source and target drives into the hot-swap slots, then use the LCD menu to start a copy or DoD 5220.22-M erase; users often forget to confirm the correct source-to-target direction before pressing start.

What maintenance will the Systor SYS201HS-DP need over time?

The 40 mm rear fans and per-port outtake fans should be kept clear of dust to maintain airflow during long duplication or sanitisation sessions.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.