Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with 24-pin ATX socket and multiple power connectors including Molex 4-pin and SATA ports, status LEDs visible

T.F.SKYWINDINTL

T.F.SKYWINDINTL Dual PSU Power Adapter ATX 24Pin to Molex 4Pin/SATA/6Pin Sync Extender Card

SKU CH-0APD-T2FP6

Adds LED status indicators for 3.3V, 5V, 12V, PS-ON and standby rails while letting two PSUs start together to power graphics cards, drives and fans via Molex 4Pin, SATA or 6Pin connectors

  • TypeDual PSU Power Adapter
  • Shows PSU status with 3.3V/5V/12V/PS-ON/Standby LEDs
  • Syncs two PSUs on/off for combined power delivery
  • Accepts Molex 4Pin, SATA, ATX 6Pin or 4Pin from main PSU
  • Secondary PSU 24Pin male connects to PSU 24Pin female
  • Plug-and-play power for graphics cards, drives and fans

Dual PSU adapter for multi-GPU rigs

This adapter synchronises two ATX power supplies so they start and shut down together, giving a single system the combined wattage of both units. It is aimed at builders running multiple graphics cards or large drive arrays that exceed one PSU's capacity. The board accepts a Molex, SATA or 6-pin lead from the primary PSU and passes the 24-pin signal to the secondary unit. No software configuration is required.

24-pin ATX sync with status LEDs

The decisive specification is the 24-pin ATX female header that mirrors the primary PSU's power-on signal to the second supply, ensuring both rails rise simultaneously. Integrated 3.3 V, 5 V and 12 V LEDs plus a PS-ON indicator show each rail's presence at a glance. This visual confirmation prevents the common mistake of assuming the second PSU is live when only the primary has started.

Plug-and-play with polarity caution

Installation is a straight cable swap: connect the chosen primary lead, seat the secondary 24-pin plug, and power on. The main risk is inserting the 24-pin connector offset by one row, which shorts the PS-ON line and prevents startup. Builders should also verify that the secondary PSU's fan spins before loading the cards, as a dead fan often signals a wiring error rather than a faulty board.

Pluspunten

  • Shows PSU status with 3.3V/5V/12V/PS-ON/Standby LEDs
  • Syncs two PSUs on/off for combined power delivery
  • Accepts Molex 4Pin, SATA, ATX 6Pin or 4Pin from main PSU
  • Secondary PSU 24Pin male connects to PSU 24Pin female
  • Plug-and-play power for graphics cards, drives and fans

Specificaties

TypeDual PSU Power Adapter

Vragen over dit artikel

What does the 24-pin ATX connector do on this adapter?

It links the secondary PSU so both units start and stop together when the main supply receives the PS-ON signal.

Which SATA power connector can I use from the primary PSU?

Any standard SATA power lead from the main PSU plugs into the adapter to provide the sync signal.

What clearance does the board need inside a case?

The compact PCB fits in a standard expansion slot opening and requires only enough room for the attached 24-pin and peripheral cables.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.