Team Group
Team Group MP44Q 1TB M.2 2280 internal SSD TM8FFD001T0C101
- Internal Solid Stat…
- Consumer
US$ 127,99US$ 130,99−2%
0.00158335BTC
Op voorraad
Team Group
Team Group TM8FFD004T0C101 4TB M.2 2280 internal SSD
A 4TB M.2 2280 internal SSD with PCIe 4.0 x4 NVMe interface delivering up to 7400 MB/s read and 6200 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D QLC NAND
- InterfacePCIe 4.0 x4 with NVMe
- 4TB capacity with 3D QLC NAND for spacious storage
- Sequential read up to 7400 MBps for rapid file access
- Sequential write up to 6200 MBps for fast data transfers
- Graphene heat dissipation label maintains thermal performance
- S.M.A.R.T. monitoring software enables health tracking
4TB PCIe 4.0 NVMe SSD
The Team Group MP44Q is a 4TB M.2 2280 internal SSD that uses a PCIe 4.0 x4 interface with NVMe 1.4 protocol. It is built with 3D QLC NAND and operates without a DRAM cache by using HMB. The drive includes a graphene heat-dissipation label and supports Windows, Linux and common consumer platforms.
QLC NAND and SLC caching define sustained speed
The single specification that determines suitability is the 3D QLC NAND paired with SLC caching. QLC stores four bits per cell for high capacity at low cost, while the SLC cache absorbs write bursts at up to 7400 MBps read and 6200 MBps write. Once the cache fills, write throughput drops to the native QLC rate, so workloads with large, continuous writes must be evaluated against this behaviour.
Graphene label manages heat under load
Under sustained load the graphene label spreads heat across the controller and NAND without adding thickness that could interfere with tight laptop or NUC slots. The drive is rated for 0 °C to 70 °C operating temperature and 2000 TBW endurance. MTBF is 1,600,000 hours. The label keeps temperatures in check during long transfers, preventing thermal throttling that would otherwise reduce sequential write performance.
Pluspunten
- 4TB capacity with 3D QLC NAND for spacious storage
- Sequential read up to 7400 MBps for rapid file access
- Sequential write up to 6200 MBps for fast data transfers
- Graphene heat dissipation label maintains thermal performance
- S.M.A.R.T. monitoring software enables health tracking
Specificaties
| Brand | Team Group |
|---|---|
| Series | MP44Q |
| Model | TM8FFD004T0C101 |
| Part Number | TM8FFD004T0C101 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D QLC NAND |
| Interface | PCIe 4.0 x4 with NVMe |
| Protocol | NVMe 1.4 |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6200 MBps |
| Terabytes Written (TBW) | 2000TB |
| MTBF | 1,600,000 hours |
| HeatSink | with HeatSink |
| Features | Compatible with Intel and AMD platforms and has one of the foll owing operating systems: Windows 11 / 10 / 8.1 / 8 / 7 / Vista or later Linux 2.6.33 or later |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | RH 90% under 40°C (operational) |
| Max Shock Resistance | 1,500G/0.5ms |
| Max Vibration Resistance | 80Hz~2,000Hz/20G |
| Height | 3.7mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7g |
| Verzendgewicht | 0.02 kg |
| Pakketafmetingen | 127 × 79 × 3 mm |
Andere versies van dit model
Nog 2 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Team Group
Team Group MP44Q 2TB M.2 2280 internal SSD TM8FFD002T0C101
- Internal Solid Stat…
- Consumer
US$ 226,99
0.00280807BTC
Op voorraadVragen over dit artikel
Will the 4TB MP44Q fit my laptop that only has an M.2 2280 slot?
Yes, the drive is built to the M.2 2280 form factor so it will physically fit any standard M.2 2280 slot in a laptop, desktop, NUC or NAS.
Does this SSD need a separate heatsink or does the included graphene label handle cooling?
The graphene heat dissipation label is factory-fitted and designed to keep the controller within its 0 °C to 70 °C operating range without any extra heatsink.
My motherboard only supports PCIe 3.0 — will I still get usable speeds?
The drive is backward compatible with PCIe 3.0 slots and will run at the slot's maximum speed while keeping full 4TB capacity and NVMe 1.4 protocol support.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
