Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 90-degree G1/4 compression fitting for 16mm OD PETG tube, 44.2 x 40.5 x 25mm, 22g

Thermaltake

Thermaltake CL-W097-CA00BL-A Pacific G14 90-Degree Compression 16mm OD

SKU CH-DC3Q-1HEZE

A 90-degree compression fitting connects 16 mm OD PETG tubing to G 1/4 threads in a custom liquid-cooling loop

  • TypeTubing
  • ColorBlack
  • Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm Applicable OD: 16mm (5/8
  • Tube MaterialCU
  • FeaturesWeight: 22.00g Screw Thread: G 1/4 Note: PETG Tube to G1/4
  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Pacific G14 90-Degree Compression Fitting

The Thermaltake Pacific G14 is a rigid 90-degree compression fitting designed to join 16mm OD PETG tubing in custom liquid-cooling loops. Its copper body with a black finish connects to standard G 1/4 threads and measures 44.20 x 40.50 x 25.00 mm while weighing 22.00g.

Suited for fixed right-angle routing.

This fitting suits builders who need a permanent 90-degree turn between PETG tubes and G 1/4 ports. It is not for loops that require an adjustable rotary angle or a different fixed angle. It also does not suit soft tubing or tubing with an outer diameter other than 16mm.

16mm OD PETG to G 1/4 compatibility

The single specification that decides fit is the 16mm outer-diameter PETG tubing requirement paired with a G 1/4 screw thread. Verify that your tubing material and diameter match exactly before purchase.

Pluspunten

  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Specificaties

BrandThermaltake
ModelCL-W097-CA00BL-A
TypeTubing
ColorBlack
Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm
Applicable OD: 16mm (5/8")
Tube MaterialCU
FeaturesWeight: 22.00g
Screw Thread: G 1/4
Note: PETG Tube to G1/4

Vragen over dit artikel

Will the 44.20 mm by 40.50 mm footprint of this 90-degree fitting clear my motherboard heatsinks?

The fitting body measures 44.20 mm long, 40.50 mm wide and 25.00 mm tall, so compare those dimensions to the space around your G 1/4 ports before ordering.

Does the G 1/4 thread on this compression fitting seal directly into a standard water-block port, or do I need an adapter?

It threads straight into any G 1/4 female port; hand-tighten then give a gentle quarter-turn with a wrench — the step most people skip is fully seating the 16 mm PETG tube against the internal stop before tightening the compression nut.

The fitting is listed as copper with a black finish; will the coating wear off if I disassemble the loop for maintenance later?

The black coating is applied over the copper body; repeated disassembly can scuff the finish at the compression nut, but the sealing surfaces and G 1/4 threads remain unaffected.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.