Thermaltake
Thermaltake CT140 EX ARGB Reverse 3-Fan Pack 140mm CL-F193-PL14SW-A
Three 140 mm fans with reversed blades, magnetic MagForce 2.0 links and nine addressable LEDs deliver 94.95 CFM airflow at 32.8 dBA
- TypeCase Fan
- Fan Size140mm
- ColorBlack
- Reversed blades show full ARGB lighting while pushing air rear-to-front
- MagForce 2.0 magnetic links snap fans together for faster, tool-free installation
- 95 CFM airflow and 2.54 mm-H2O static pressure at 1800 RPM
- 9 addressable LEDs sync with major motherboard software for 16.8 million colours
- Anti-vibration rubber pads on a solid frame keep noise to 32.8 dBA
Three-Pack 140 mm Reverse ARGB Fans
This three-fan pack delivers 140 mm reversed-blade coolers designed for builders who want visible lighting regardless of airflow direction. The MagForce 2.0 magnetic system lets each unit snap together quickly, reducing cable clutter inside the chassis. Nine addressable LEDs per fan sync with major motherboard software for 16.8 million colour options. The bundle suits radiators or case mounts where both intake and exhaust aesthetics matter.
Thermals Noise and Power in Normal Use
At 1800 RPM the fans move 94.95 CFM of air while producing 2.54 mm-H2O static pressure, sufficient for dense radiator fins or restrictive mesh panels. Acoustic output stays at 32.8 dBA, keeping the system quiet during typical gaming or workload sessions. Anti-vibration rubber pads on the frame corners further dampen resonance transferred to the case. Power draw remains within standard 5 V ARGB header limits, so no extra adapter is required.
Bundled Accessories and Software Impact
The pack includes the magnetic interconnect bridges that join fans side-by-side without individual wires running to the motherboard. A single 5 V ARGB lead and a single PWM lead control the whole chain, simplifying routing and BIOS fan-curve setup. Motherboard sync software from ASUS, MSI, Gigabyte, Biostar and ASRock recognises the addressable LEDs directly, enabling per-LED effects, colour cycles and temperature-linked profiles without proprietary controllers.
Pluspunten
- Reversed blades show full ARGB lighting while pushing air rear-to-front
- MagForce 2.0 magnetic links snap fans together for faster, tool-free installation
- 95 CFM airflow and 2.54 mm-H2O static pressure at 1800 RPM
- 9 addressable LEDs sync with major motherboard software for 16.8 million colours
- Anti-vibration rubber pads on a solid frame keep noise to 32.8 dBA
Specificaties
| Type | Case Fan |
|---|---|
| Fan Size | 140mm |
| Color | Black |
| Verzendgewicht | 0.41 kg |
| Pakketafmetingen | 170 × 155 × 89 mm |
Vragen over dit artikel
How do I connect the three fans together using the MagForce 2.0 magnetic system, and what is the common mistake to avoid?
Snap each fan to the next using the larger magnetic contact pads; the common mistake is leaving a tiny gap between units, which breaks the daisy-chain power and ARGB signal.
Which part of the CT140 EX ARGB Reverse fans will need replacement first under continuous 1800 RPM operation?
The sleeve bearing is the wear item; at 32.8 dBA it runs quietly, but sustained high speed will eventually require a bearing swap.
At what point does airflow become the limiting factor during sustained loads with these 140 mm fans?
The 94.95 CFM ceiling is reached before static pressure hits 2.54 mm-H2O, so dense radiator fins will choke flow first.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.0000104BTC
Op voorraad