Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black rectangular ATX power supply tester with color LCD display and multiple connector ports

Thermaltake

Thermaltake Dr. Power III Pro ATX PSU Tester AC-083-OO1NAN-A1

SKU CH-SQH5-R3MXP MPN AC-083-OO1NAN-A1

Tests ATX power supplies up to 12V v3.1 with real-time voltage readout, PG timing, SENSE0/SENSE1 detection, and audible fault alerts on a colour display

  • ColorBlack
  • FeaturesWith full support for modern ATX PSUs up to ATX12V v3.1, Dr.
  • Dimensions74.8 x 135.8 x 24.4mm
  • Tests up to ATX12V v3.1 spec PSUs
  • Color LCD shows real-time +12V, +5V, +3.3V, +5Vsb rails
  • Detects SENSE0/SENSE1 for 150W, 300W, 450W, 600W GPU power
  • Audible beep and red screen flag faults instantly
  • Continuity check plus PG timing in ms on one device

ATX 3.1 power-supply tester

The Thermaltake Dr. Power III Pro checks ATX power supplies up to the ATX12V v3.1 specification. It reads voltage on the +12V, +5V, +3.3V and +5Vsb rails and measures the PG signal in milliseconds. A colour LCD shows real-time data and turns red with an audible beep when a fault is detected. The unit fits technicians, builders and repair professionals who need quick diagnostics.

Connector coverage for modern builds

The tester includes a 24-pin main-board socket, a 12V-2X6 connector, 4+4-pin EPS, 6+2-pin PCIe, SATA and Molex headers. It detects SENSE0 and SENSE1 sideband signals on the 12+4-pin connector and identifies GPU power levels of 150W, 300W, 450W and 600W. This lets a builder verify a PSU before installing it in a case without needing a full system.

Hand-held thermals and power draw

The compact black enclosure measures 74.8 x 135.8 x 24.4 mm and draws power directly from the supply under test. No battery or external adapter is required so the tool adds no heat or noise of its own. The colour display remains readable during extended test sessions while the audible alert sounds only when a rail falls out of specification.

Pluspunten

  • Tests up to ATX12V v3.1 spec PSUs
  • Color LCD shows real-time +12V, +5V, +3.3V, +5Vsb rails
  • Detects SENSE0/SENSE1 for 150W, 300W, 450W, 600W GPU power
  • Audible beep and red screen flag faults instantly
  • Continuity check plus PG timing in ms on one device

Specificaties

BrandThermaltake
ModelDr. Power III Pro
Part NumberAC-083-OO1NAN-A1
ColorBlack
FeaturesWith full support for modern ATX PSUs up to ATX12V v3.1, Dr. Power III Pro offers techs, builders, and repair professionals a reliable tester equipped with a color display and high-precision voltage readout.
Dimensions74.8 x 135.8 x 24.4mm
Verzendgewicht0.18 kg
Pakketafmetingen165 × 102 × 38 mm

Vragen over dit artikel

What is the maximum ATX specification version this tester supports?

The Dr. Power III Pro supports modern ATX power supplies up to the ATX12V v3.1 specification, covering the latest PSU designs.

Does the tester produce any audible alerts when a fault is detected during extended use?

Yes, it features an active alert system that sounds a beep and turns the display red to indicate exactly where a fault was detected.

Which power connectors must the power supply already have for this tester to function?

The unit connects to 24-pin main board, 12V-2x6, 4+4-pin EPS, 6+2-pin PCIe, SATA, and Molex connectors on the PSU under test.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.