Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green or black PCB 8GB DDR4 UDIMM stick with gold contacts

Timetec

Timetec 8GB DDR4 2666MHz CL19 UDIMM desktop RAM

SKU CH-S1ZN-FSH5X

An 8 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V operation

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ColorBlack PCB
  • 8GB capacity supports smoother multitasking on DDR4 desktops
  • 2666MHz speed with CL19 latency delivers responsive performance
  • 2V operation reduces power draw versus DDR3 modules
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Non-ECC unbuffered design suits consumer PC and workstation builds

8GB DDR4 2666MHz UDIMM for desktop upgrades

This single 8 GB module runs at 2666 MHz with CL19 latency and 1.20 V operation. It fits standard 288-pin DDR4 UDIMM slots on compatible desktops and workstations. The non-ECC unbuffered design suits mainstream consumer platforms.

Thermals noise and power draw

Operating at 1.20 V keeps power consumption low compared with older DDR3 modules. The low voltage also reduces heat output, helping system fans run quieter during typical workloads. No active cooling is required for normal operation.

2666MHz CL19 speed rating

The module is rated for 2666 MHz at CL19, matching the PC4-21300 specification. Systems that support 2666 MHz will run at that speed; boards limited to 2133 MHz or 2400 MHz will downclock automatically. It is not compatible with laptop SODIMM slots.

Pluspunten

  • 8GB capacity supports smoother multitasking on DDR4 desktops
  • 2666MHz speed with CL19 latency delivers responsive performance
  • 2V operation reduces power draw versus DDR3 modules
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Non-ECC unbuffered design suits consumer PC and workstation builds

Specificaties

BrandTimetec
ModelMR-G8GD426U2E
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ColorBlack PCB

Vragen over dit artikel

How do I install the 288-pin UDIMM and what step do people often miss?

Align the notch with the slot key, press firmly until the retention clips click, and verify the motherboard recognises the full 8GB at 2666MHz in BIOS.

What maintenance or replacement will the 1.2V DDR4 module need later?

No scheduled maintenance is required; replace only if memory errors appear or a capacity upgrade is desired.

What limit appears first under sustained load with CL19 timing?

The CAS latency of 19 cycles at 2666MHz sets the response-time floor during continuous memory-intensive work.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.