Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Bare 3.5-inch hard drive, silver aluminium casing, exposed circuit board, label shows 4TB 7200 RPM SAS

Toshiba

Toshiba MG03SCA400 4TB 7200 RPM 64MB SAS 3.5" internal hard drive

SKU CH-7CPT-DGV9Y MPN MG03SCA400

4 TB enterprise hard drive with 7200 RPM spindle speed and 64 MB cache for 24×7 server workloads

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Cache64MB
  • FeaturesThe new reliable nearline model features a top storage capac

Options 4TB

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed enables quick data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6Gb/s interface connects to enterprise controllers
  • 24×7 rated design supports continuous server workloads

4 TB SAS Enterprise Drive

The Toshiba MG03SCA400 is a 4 TB 3.5-inch internal hard drive built for nearline server workloads. It spins at 7200 RPM with a 64 MB cache and connects through a SAS 6Gb/s interface. The bare drive is rated for continuous 24x7 operation in multi-drive environments.

Suited for RAID and nearline storage

This drive fits administrators who need consistent throughput and rotational-vibration tolerance in multi-bay chassis. Error Correction Code and Enhanced Power Condition State Technology help maintain data integrity and manage power during sustained use. Systems without a SAS host bus adapter or backplane cannot install this unit, and workloads demanding solid-state latency should consider a different storage tier.

SAS 6Gb/s interface decides compatibility

The single specification that determines fit is the SAS 6Gb/s interface; the controller or backplane must support this exact protocol. A 26.1 mm z-height matches standard 3.5-inch bays, while 147 mm length and 101.6 mm width follow the usual form-factor envelope. Verify the host connector and cabling before purchase.

Pluspunten

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed enables quick data access
  • 64 MB cache buffers frequent read and write operations
  • SAS 6Gb/s interface connects to enterprise controllers
  • 24×7 rated design supports continuous server workloads

Specificaties

BrandTOSHIBA
ModelMG03SCA400
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity4TB
RPM7200 RPM
Cache64MB
FeaturesThe new reliable nearline model features a top storage capacity of up to 4 TB in a 3.5-inch form factor and leading-edge 6Gb/sec SAS interface. Intended for 24 x 7 operation, the MG03SCAxxx also includes features that are critical to business operations such as enhanced Error Correction Code (ECC), Anti Rotational Vibration (RV) technology for multi-drive systems, and enhanced power condition state technology.
The MG03SCAxxx provides a flexible and cost effective storage solution for enterprise applications including entry-level servers, storage arrays, RAID systems as well as privat
UsageIdeal for Servers
Form Factor3.5"
Height (maximum)26.1 mm
Width (maximum)101.6 mm
Length (maximum)147 mm
Verzendgewicht0.62 kg
Pakketafmetingen150 × 112 × 28 mm

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the MG03SCA400 work in my older server that only has 3Gb/s SAS backplanes?

Yes, the SAS 6Gb/s interface negotiates down to 3Gb/s so the drive will operate at the slower link speed without any configuration changes.

How can I verify the drive is running at 7200 RPM and using its 64MB cache after installation?

Check the SMART attributes or the controller BIOS — they report the spindle speed and cache size directly from the drive firmware.

The listing says "Bare Drive"; does the box include mounting screws, a SAS cable or a tray?

Only the 3.5-inch drive itself is supplied; mounting screws, SAS data cable and any hot-swap tray must be sourced separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.