Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Handheld network cable tester in dark grey plastic housing with multiple port types and LCD display

TRENDnet

TRENDnet TC-NT2 Cable Tester for Ethernet, Coax, USB and Token Ring

SKU CH-7GP1-7GXWJ MPN TC-NT2

Tests Ethernet, coax, USB and Token Ring cables up to 300 m with tone tracing

  • FeaturesTests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax
  • Package Contents99164H
  • Tests Ethernet pinouts to 300 metres with clear fault display
  • Verifies coax, RJ-11, RJ-12, RJ-45 and Token Ring wiring in one tool
  • Built-in tone generator traces cables behind walls and panels
  • Checks USB and IEEE 1394 links using optional adapters
  • All components store neatly in the supplied travel case

Cable Tester for Network Professionals

The TRENDnet TC-NT2 is a comprehensive cable tester designed for network professionals. It accurately checks pin configurations for Ethernet, USB, BNC, and patch panel cables. All components fit into a handy travel case for portable use.

Sustained Testing Capability

The tester identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft). It supports 10/100/1000Base-T, 10Base-2 coax, RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring cables. A built-in tone generator assists with tracing cables during extended diagnostic sessions.

Maximum Cable Distance Supported

The single specification that decides suitability is the maximum test distance of 300 meters (984 ft). Installers certifying runs beyond this length need a different instrument. Buyers who need to test fibre-optic links or cables exceeding this range cannot use this model.

Pluspunten

  • Tests Ethernet pinouts to 300 metres with clear fault display
  • Verifies coax, RJ-11, RJ-12, RJ-45 and Token Ring wiring in one tool
  • Built-in tone generator traces cables behind walls and panels
  • Checks USB and IEEE 1394 links using optional adapters
  • All components store neatly in the supplied travel case

Specificaties

BrandTRENDnet
ModelTC-NT2
FeaturesTests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables
Tests USB and IEEE 1394 cables with optional adapters
Built-in Tone Generator for tracing cable with standard Tone Probe
Tests the grounding on shielded (screened) cable
Verifies cable continuity, opens, shorts, and miswires
Tests cable up to 300 meters
Auto-Scan or Manual-Scan mode
Includes Deluxe Carrying Pouch, two RJ45-to-BNC Adapters, and RJ45 Patch Cable
Package Contents99164H
Verzendgewicht0.28 kg
Pakketafmetingen165 × 112 × 53 mm

Vragen over dit artikel

How much power does the TC-NT2 draw when running tests all day?

The tester is a passive handheld device with no mains supply; it uses a small internal battery only while actively testing cables.

Which adapters must I already own to test USB or IEEE 1394 cables with the TC-NT2?

USB and IEEE 1394 cable tests require the optional adapters sold separately; the base unit tests Ethernet, coax and Token Ring without them.

Will the TC-NT2 correctly verify older 10Base-2 coax and Token Ring runs alongside modern Ethernet?

Yes — it checks pin configuration for 10Base-2 coax, Token Ring and 10/100/1000Base-T Ethernet up to 300 metres in one tool.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.