Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Standalone USB 3.2 duplicator sanitizer unit with seven target ports

U-Reach, Inc.

U-Reach, Inc. 1-to-7 Intelligent 9 USB 3.2 Duplicator Sanitizer

SKU CH-DH9D-R0MFD

Standalone USB 3.2 duplicator and sanitizer copies up to seven drives at 10 GB/min with bit-for-bit or quick-copy modes and MD5 verification

  • Operating TypeStandalone
  • Standalone operation with no PC required
  • Copies USB 2.0, 3.0, 3.1 and 3.2 devices at up to 10 GB/min
  • Quick-copy mode copies only data areas for FAT16, 32, 64, NTFS, ext2, 3, 4 and HFS formats
  • Whole-media bit-for-bit duplication with no format limitation
  • Event log records time, result, VID, PID, MID, OID and serial numbers

Standalone USB 3.2 duplicator and sanitizer

The U-Reach 1-to-7 Intelligent 9 U3 Series unit copies and sanitises USB flash drives and external USB hard disks without a host computer. It handles up to seven target devices simultaneously and supports USB 2.0, 3.0, 3.1 and 3.2 interfaces. The system is aimed at IT departments, duplication houses and forensic labs that need verified, bit-level copies of removable media.

Fits a bench-top workflow with redundant power

The duplicator operates standalone, so it needs only a mains connection and the target USB devices. Its redundant power design supplies sufficient current for bus-powered external hard disks and other demanding USB peripherals. No host PC, software installation or additional controller cards are required, freeing workstation resources for other tasks.

Sustained copy speed adapts to target count

The engine delivers up to 10 GB/min per target when fewer ports are populated, then automatically reduces throughput as more targets are added to maintain data integrity. Quick Copy mode copies only used sectors for supported Windows, Linux and Mac file systems, while Whole Media mode performs bit-for-bit duplication regardless of format. An event log records every operation with timestamps, VID/PID, serial numbers and pass/fail results for traceability.

Pluspunten

  • Standalone operation with no PC required
  • Copies USB 2.0, 3.0, 3.1 and 3.2 devices at up to 10 GB/min
  • Quick-copy mode copies only data areas for FAT16, 32, 64, NTFS, ext2, 3, 4 and HFS formats
  • Whole-media bit-for-bit duplication with no format limitation
  • Event log records time, result, VID, PID, MID, OID and serial numbers

Specificaties

Operating TypeStandalone

Vragen over dit artikel

How many USB targets can the duplicator write to at once?

The unit has one source port and seven target ports, so it can duplicate to seven USB devices simultaneously.

Does the duplicator generate noticeable heat or fan noise during extended copy jobs?

The device uses a redundant power design to supply each port adequately, and it runs as a standalone unit without an attached PC, keeping heat and acoustic output low in typical office environments.

What USB cable types or adapters are needed to connect target drives?

Targets must use standard USB 2.0, 3.0, 3.1 or 3.2 connectors; eUSB modules with 2.54 mm or 2.00 mm pitch require the appropriate adapter.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.