Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact dual laser engraver, silver frame, open work bed, 160 by 140 mm area, blue and IR modules

VEVOR

VEVOR Nano Duo 2-in-1 Dual Laser Engraver 20W Blue 2W IR 10000 mm/s 160x140 mm

SKU CH-19DH-X721S

A dual 20 W blue and 2 W infrared laser engraver with a 160 x 140 mm work area, 10 000 mm/s speed and manual plus auto focus

  • TypeOther Appliances
  • Dual 20W blue and 2W IR lasers handle wood, acrylic and metal
  • 10000 mm/s engraving speed cuts project time on every job
  • 160 x 140 mm work area fits A6 and smaller pieces
  • 03 mm IR spot size produces fine detail on hard materials
  • Manual and auto focus options adapt to flat or uneven surfaces

Dual-laser engraver for makers

The VEVOR Nano Duo combines a 20W blue laser at 455 nm with a 2W infrared laser at 1064 nm in a single portable unit. It is built for hobbyists and small workshops that need both organic-material engraving and metal marking without switching machines. The system fits on a benchtop and is ready for DIY projects.

160 x 140 mm working area

The effective engraving field measures 160 by 140 mm, which sets the maximum size of any single design. Pieces larger than this must be tiled or engraved on a different machine. The 10000 mm/s top speed applies within this boundary.

Manual and auto focus with accessory set

Both manual and automatic focusing are supported, letting operators choose the method that suits the material and workflow. The package includes a complete accessory set and a user manual so the engraver can be set up and operated immediately.

Pluspunten

  • Dual 20W blue and 2W IR lasers handle wood, acrylic and metal
  • 10000 mm/s engraving speed cuts project time on every job
  • 160 x 140 mm work area fits A6 and smaller pieces
  • 03 mm IR spot size produces fine detail on hard materials
  • Manual and auto focus options adapt to flat or uneven surfaces

Specificaties

TypeOther Appliances

Vragen over dit artikel

What does the 10000 mm/s speed mean for actual engraving time on this machine?

The 10000 mm/s figure is the maximum traverse rate of the laser head. Real engraving time depends on material, power setting, and design complexity, so the head rarely sustains that speed throughout a full job.

How does the 455 nm blue and 1064 nm infrared wavelength combination limit what I can mark?

The 455 nm blue laser engraves wood, acrylic, and similar organics, while the 1064 nm infrared laser marks metals and plastics; each wavelength only works well on materials that absorb it.

What clearance do I need on my bench for the 160 x 140 mm work area?

Allow at least 160 mm by 140 mm of flat surface for the engraving bed, plus extra room around the frame for cable routing and the accessory set included in the box.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.