Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green PCB PCIe x1 card with large silver heatsink and two SATA ports

Vszerda

Vszerda SATA 3 PCIe Expansion Card Marvell 88SE9125 2 Ports

SKU CH-NHK3-YQ15F

Adds two SATA 3.0 ports via a PCIe x1 slot using a Marvell 88SE9125 controller with a large heatsink

  • Adds two SATA 3.0 ports via PCIe x1 slot
  • Marvell 88SE9125 controller supports 6.0 Gbps speeds
  • Large heatsink enables sustained operation without overheating
  • Works with Windows 10/8/7, Vista, XP, Linux systems
  • Backward compatible with SATA 2.0 and 1.5 Gbps drives

Vszerda SATA 3 PCIe Expansion Card

This Vszerda add-on card uses the Marvell 88SE9125 controller to provide two SATA 3.0 ports through a single PCI-Express x1 slot. It suits owners of desktop PCs who need extra internal drive connections for storage upgrades or data migration. The card fits any compatible PCI-E x2, x4, x8 or x16 slot and works with Windows XP through Windows 10 and Linux systems.

Build quality and daily connectivity

A large heatsink covers the main chip to support safe operation during long sessions. The board exposes two standard SATA 3.0 interfaces that accept 6.0, 3.0 and 1.5 Gbps drives and handle hot-swap insertion without a shutdown. The controller runs in AHCI 1.0 or IDE mode and supports native command queueing and FIS-based port multiplier switches for flexible drive management.

Thermals, noise and power draw

Passive cooling from the heatsink keeps the Marvell 88SE9125 at safe temperatures without adding fan noise to the system. The PCI-Express 2.0 x1 host interface limits peak bandwidth to the lane speed, so the card draws modest power from the slot during normal file transfers and backup workloads.

Pluspunten

  • Adds two SATA 3.0 ports via PCIe x1 slot
  • Marvell 88SE9125 controller supports 6.0 Gbps speeds
  • Large heatsink enables sustained operation without overheating
  • Works with Windows 10/8/7, Vista, XP, Linux systems
  • Backward compatible with SATA 2.0 and 1.5 Gbps drives

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What speeds does the PCI-Express v2.0 x1 interface provide for the two SATA 3.0 ports?

The card uses a PCI-Express v2.0 x1 slot, compatible with x2, x4, x8 and x16 slots. Each SATA 3.0 port runs at up to 6.0 Gbps, with backward compatibility to 3.0 Gbps and 1.5 Gbps.

What slot and clearance does this low-profile card need to fit?

It requires a PCI-Express x1 slot (also fits x2, x4, x8, x16). The board includes a large heatsink, so verify adjacent-slot clearance before installing.

How is the card installed, and which driver step is often missed?

Power off the PC, insert the card into a free PCI-Express x1 slot, connect SATA drives, then boot. On Windows, ensure the controller is set to AHCI mode in Device Manager or BIOS; otherwise the drives may not appear.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.