Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 60x20mm 4-pin case fan with ball bearing

Zyvpee

Zyvpee 2408NL-04W-B56 T01 60x20mm 4-pin case fan

SKU CH-GG7P-NGV86

A 60 × 20 mm 4-pin ball-bearing fan running at 12 V 0.14 A for CPU or case cooling

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for reliable long-term operation
  • 4-pin PWM connector enables precise speed control
  • Compact 60 x 20 mm frame fits tight CPU cooler spaces
  • 12 V 0.14 A rating keeps power draw low
  • Non-LED black design suits clean, distraction-free builds

Zyvpee 60 x 20 mm 4-pin case fan

This 60 x 20 mm fan mounts in tight CPU cooler stacks and small-form-factor cases. The 4-pin connector allows motherboard PWM control so speed scales with temperature. It suits builders who need targeted airflow in a compact footprint.

Ball bearing for continuous operation

The dual ball bearing is rated for long running hours and resists dust ingress better than sleeve designs. At 12 V and 0.14 A it draws modest power while maintaining steady RPM under sustained load. Acoustic output stays predictable during extended sessions.

4-pin PWM control decides fit

The 4-wire header is the single spec that determines compatibility with modern fan headers. Boards limited to 3-pin voltage control will run the fan at fixed speed. Buyers who need addressable RGB lighting or larger frame sizes should look elsewhere.

Pluspunten

  • Ball bearing for reliable long-term operation
  • 4-pin PWM connector enables precise speed control
  • Compact 60 x 20 mm frame fits tight CPU cooler spaces
  • 12 V 0.14 A rating keeps power draw low
  • Non-LED black design suits clean, distraction-free builds

Specificaties

BrandZyvpee
Series2408NL-04W-B56 T01
Model2408NL-04W-B56
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*20MM

Vragen over dit artikel

How loud and how much power does the 60x20mm ball-bearing fan draw at 12 V?

The fan runs on 12 V and draws 0.14 A, giving a 4-pin PWM connection for speed control so noise and heat output scale with the duty cycle you set.

What motherboard header is required for the 4-pin connector on this 6020 cooler?

A standard 4-pin PWM fan header supplies the 12 V and the control signal the 2408NL-04W-B56 needs.

Will the 60 mm frame and 4-pin PWM plug work with my older 3-pin chassis headers?

The 4-pin plug fits a 3-pin header mechanically, but speed will run at full 12 V constant because the PWM line has no mate.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.