Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small transparent 30mm square fan with sleeve bearing and two wires

Zyvpee

Zyvpee 3007 05 30mm sleeve bearing 5V transparent case fan

SKU CH-4Q7P-5WAFP

30 mm sleeve-bearing case fan runs on 5 V with a transparent frame and 25–30 dBA noise

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeSleeve bearing
  • Noise Level25 - 30 dBA
  • Power Connector2 Wires
  • Ultra-compact 30 mm frame fits tight 3D-print builds
  • 5 V two-wire power simplifies low-voltage wiring
  • Sleeve bearing keeps noise between 25 and 30 dBA
  • Transparent housing shows internal airflow without LEDs
  • 7 mm slim profile suits space-constrained GPU coolers

Compact 30mm case fan for tight builds

The Zyvpee 3007 05 is a 30mm square case fan with a 7mm thickness. It runs on 5V through a two-wire connection and uses a sleeve bearing. The transparent frame has no LEDs and produces 25 to 30 dBA. It is aimed at builders working on small-form-factor projects or custom 3D-printed GPU shrouds where a 3cm footprint is required.

Suits space-constrained 5V cooling

This fan suits anyone needing a 30mm transparent fan that runs directly from a 5V header or adapter. It is not for builds that need PWM speed control, a three- or four-pin connector, or a larger frame size. Buyers who want RGB lighting or higher airflow for standard chassis should look elsewhere.

30mm frame with two-wire 5V power

The deciding spec is the 30mm frame combined with a two-wire 5V power connector. If your mounting holes or power header only accept this exact size and voltage, the fan will fit; if you need a standard 4-pin PWM header or a different frame dimension, it will not.

Pluspunten

  • Ultra-compact 30 mm frame fits tight 3D-print builds
  • 5 V two-wire power simplifies low-voltage wiring
  • Sleeve bearing keeps noise between 25 and 30 dBA
  • Transparent housing shows internal airflow without LEDs
  • 7 mm slim profile suits space-constrained GPU coolers

Specificaties

Series3007 05
Model3007 05
TypeCase Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeSleeve bearing
Noise Level25 - 30 dBA
Power Connector2 Wires
ColorTransparent
LEDNon-LED
Features30*07mm

Vragen over dit artikel

What power source is required for the 5V 2-wire connector on this fan?

The fan runs on a 5 V supply through its two-wire lead; connect it to a compatible 5 V header or adapter that can deliver the required current.

Will the 30 mm transparent frame and 7 mm thickness fit inside my existing CPU cooler shroud?

The unit measures 30 mm square by 7 mm deep, so verify your cooler’s mounting holes and clearance match those dimensions before installing.

How can I confirm the sleeve-bearing fan is running at its rated 25–30 dBA after installation?

Listen at a normal working distance; the fan should produce a quiet, steady airflow with no rattling or grinding, matching the 25–30 dBA specification.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.