Zyvpee
Zyvpee 3110KL-04W-B79 80 mm 12 V 0.38 A 3-wire case fan
80 mm ball-bearing case fan runs on 12 V at 0.38 A with a three-wire connector for Cisco 2851 compatibility
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 wires
- ColorBlack
- LEDNon-LED
- Ball-bearing reliability for long service life
- 12 V 0.38 A three-wire power for simple motherboard control
- 80 × 80 × 25 mm square frame fits standard 80 mm mounts
- Non-LED black design keeps builds clean and professional
- Cisco 2851 compatibility verified by manufacturer
Compact 80 mm case fan
The Zyvpee 3110KL-04W-B79 is an 80 mm square DC cooler designed for tight chassis spaces. It runs on 12 V and draws 0.38 A through a standard three-wire power connector. The black frame and non-LED design keep the look neutral for professional or embedded builds.
Ball-bearing motor and three-wire power
A ball-bearing motor provides reliable rotation at the stated voltage and current. The three-wire connector supplies power and tachometer feedback without PWM control. At 25 mm thick, the fan fits standard 80 mm mounting holes and leaves room for adjacent components or cable routing.
Steady airflow under continuous duty
The ball bearing and fixed 12 V input deliver consistent airflow during prolonged operation. Without PWM the speed remains constant, so acoustic output does not vary with load. This behaviour suits always-on equipment such as the Cisco 2851 where predictable cooling matters more than burst performance.
Pluspunten
- Ball-bearing reliability for long service life
- 12 V 0.38 A three-wire power for simple motherboard control
- 80 × 80 × 25 mm square frame fits standard 80 mm mounts
- Non-LED black design keeps builds clean and professional
- Cisco 2851 compatibility verified by manufacturer
Specificaties
| Series | 3110KL-04W-B79 |
|---|---|
| Model | 3110KL-04W-B79 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 wires |
| Color | Black |
| LED | Non-LED |
| Features | Square DC Cooler |
| Dimensions | 80*80*25mm |
Vragen over dit artikel
Will the 0.38 A draw trip a 12 V header rated for 0.3 A under continuous load?
The fan draws 0.38 A at 12 V, which exceeds a 0.3 A header limit and may trip protection during sustained use.
How loud does the ball-bearing 8025 fan get after hours of 12 V operation?
Ball bearings typically produce a steady mechanical hum that remains constant once the fan reaches full speed.
Does my motherboard need a three-pin DC header to run this 3110KL cooler?
Yes, the 3-wire connector requires a standard three-pin 12 V DC fan header for power and speed reporting.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.0000104BTC
Op voorraad