Zyvpee
Zyvpee 3110RL-04W-B79 C52 80mm 25mm 12V .44A 3-pin case fan
An 80 mm ball-bearing case fan with a 3-pin connector runs at 12 V and 0.44 A for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling Fan
- Ball-bearing motor for long service life
- 12 V 0.44 A draw keeps power use low
- 3-pin connector fits standard motherboard headers
- 80 × 25 mm frame suits compact cases
- Black non-LED design blends into any build
Zyvpee 80mm Ball-Bearing Case Fan
This Zyvpee case fan measures 80 by 25 millimetres and uses a ball bearing. It runs on 12 volts at 0.44 amps through a three-pin power connector. The black frame carries no LED lighting. It is sold new and suits builds that need an 80mm cooling device.
Suits 80mm mounts without PWM needs
Builders with an 80mm mounting hole and a three-pin header can install it directly. The ball bearing supports continuous CPU cooling duty. Systems that require four-pin PWM control or a larger mounting pattern cannot use this unit.
Three-pin 12V 0.44A power specification
The fan draws 0.44 amps at 12 volts over a three-pin connector. That single electrical interface decides whether the part fits the motherboard header and power budget. Verify the header type and current capacity before purchase.
Pluspunten
- Ball-bearing motor for long service life
- 12 V 0.44 A draw keeps power use low
- 3-pin connector fits standard motherboard headers
- 80 × 25 mm frame suits compact cases
- Black non-LED design blends into any build
Specificaties
| Brand | Zyvpee |
|---|---|
| Series | 3110RL-04W-B79 C52 |
| Model | 3110RL-04W-B79 C52 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 80*25MM |
Vragen over dit artikel
How much current does the 12 V motor draw once it is running in a case?
The fan is rated at 0.44 A at 12 V, so that is the steady-state current the motherboard header must supply.
What does the 3-pin connector limit for speed control?
A 3-pin header can only vary voltage, so the fan speed changes with voltage level rather than a PWM duty cycle.
Will the 80 mm by 25 mm frame fit a standard 80 mm mounting pattern?
Yes, the 80 mm square frame with 25 mm thickness matches the common 80 mm fan screw spacing used on cases and heatsinks.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001051BTC
Op voorraad