Zyvpee
Zyvpee AD0912MB-A72GL 90x25mm 12V 0.17A 3-pin case fan
A 90 mm ball-bearing case fan running at 2500 to 2999 RPM on 12 V DC power
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- RPM2500-2999 RPM
- Power Connector3 Pin
- ColorBlack
- Efficient cooling from 2500-2999 RPM airflow
- Reliable ball bearing for continuous operation
- Standard 3-pin connector fits most motherboards
- Compact 90x25mm frame suits tight builds
- Low 0.17A draw keeps power use minimal
Compact 90 mm case fan
The Zyvpee AD0912MB-A72GL is a 90 mm square DC axial fan designed for standard case mounting points. It suits builders who need a straightforward 12 V cooler for tight chassis spaces or targeted component airflow.
3-pin DC power and ball bearing
The fan connects via a three-pin header and draws 0.17 A at 12 V, so it runs from any standard motherboard or fan controller without PWM circuitry. Ball-bearing construction supports continuous operation in horizontal or vertical orientations.
2500 to 2999 RPM operating range
At full speed the fan moves air through a 25 mm thick frame, giving usable pressure for heatsink or radiator stacks up to moderate density. It will not satisfy high-static-pressure demands of dense fin arrays or multi-radiator loops.
Pluspunten
- Efficient cooling from 2500-2999 RPM airflow
- Reliable ball bearing for continuous operation
- Standard 3-pin connector fits most motherboards
- Compact 90x25mm frame suits tight builds
- Low 0.17A draw keeps power use minimal
Specificaties
| Series | AD0912MB-A72GL |
|---|---|
| Model | AD0912MB-A72GL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| RPM | 2500-2999 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 90*90*25mm |
Vragen over dit artikel
How fast does the AD0912MB-A72GL spin under load?
The fan runs between 2500 and 2999 RPM depending on the voltage applied.
What noise and heat should I expect from the ball-bearing motor at 12 V?
At 0.17 A the motor draws about 2 W, so heat output is low and the ball bearing keeps acoustic levels modest for continuous operation.
Does my case need a specific header for the 3-pin plug?
Yes, a standard 12 V three-pin fan header on the motherboard or a compatible fan controller is required.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001044BTC
Op voorraad