Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 80 by 25 millimetre case fan with three-pin connector

Zyvpee

Zyvpee AS08012XB259300 80mm 12V 0.57A 3-pin case fan

SKU CH-P1AG-F4X0P

80 mm hydraulic-bearing case fan with 3-pin 12 V power for CPU cooler mounting

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 80 mm size fits tight CPU cooler mounts
  • 12 V 0.57 A draw keeps power use low
  • Hydraulic bearing reduces friction for quieter running
  • 3-pin connector works with standard motherboard headers
  • Black non-LED frame suits understated builds

Compact 80mm CPU cooling fan

The Zyvpee AS08012XB259300 is an 80 by 25 millimetre case fan built for CPU cooler mounting. It runs on 12 volts and draws 0.57 amps through a three-pin power connector. The hydraulic bearing and non-LED black frame suit builders who need a straightforward replacement for tight spaces.

Hydraulic bearing sustains steady airflow

Hydraulic bearing construction keeps friction low during continuous operation, so the fan maintains consistent speed without the rattle that sleeve bearings develop over time. The three-pin connection reports rotational speed to the motherboard, allowing the system to adjust voltage for stable thermal performance under prolonged loads.

Direct swap for 80mm three-pin coolers

This unit replaces an existing 80mm three-pin fan on a CPU cooler when the original becomes noisy or fails. The jump is worth it when the current fan uses a sleeve bearing that has worn out or when the connector layout matches the three-pin header exactly. Builders needing PWM control or larger frame sizes should look elsewhere.

Pluspunten

  • 80 mm size fits tight CPU cooler mounts
  • 12 V 0.57 A draw keeps power use low
  • Hydraulic bearing reduces friction for quieter running
  • 3-pin connector works with standard motherboard headers
  • Black non-LED frame suits understated builds

Specificaties

BrandZyvpee
SeriesAS08012XB259300
ModelAS08012XB259300
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeHydraulic
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions80 * 25mm
Package Contentsrefer to title

Vragen over dit artikel

How much noise and heat does the AS08012XB259300 produce when running continuously?

The hydraulic bearing is designed for quiet operation, and the 12 V 0.57 A rating keeps power draw modest during all-day use.

What connector does the AS08012XB259300 need on my motherboard or fan controller?

It uses a standard 3-pin connector, so a 3-pin header or a 4-pin header running in voltage-control mode is required.

Will the 80 mm x 25 mm frame of the AS08012XB259300 line up with the mounting holes on my older CPU cooler?

Yes, the 80 mm square footprint matches the common 80 mm mounting pattern used on many legacy coolers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.