Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black square case fan 40 by 48 millimetres 7-wire 8-pin connector

Zyvpee

Zyvpee DB04048B12U 40x48mm 12V 1.14A 7-wire 8-pin case fan

SKU CH-SWGA-HAN2C

A 40 by 48 millimetre case fan with dual ball bearings, 12 volt 1.14 amp power draw and a 7-wire 8-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector7 Wires
  • ColorBlack
  • LEDNon-LED
  • Dimensions40*48mm
  • Two-ball bearing for extended service life
  • 12 V 1.14 A power draw fits standard server rails
  • 40 mm × 48 mm footprint suits tight 1U chassis
  • Seven-wire eight-pin connector enables full speed and monitoring control
  • Non-LED black frame keeps rack lighting clean

Zyvpee 40x48mm Server Cooling Fan

The Zyvpee DB04048B12U is a compact square case fan measuring 40 by 48 millimetres. It runs on 12 volts drawing 1.14 amps and uses a seven-wire lead terminating in an eight-pin connector. Dual ball bearings support continuous operation in servers or workstations where space is restricted.

Suited for tight 4048 mounting holes

This unit fits chassis designed for the 4048 form factor and delivers tachometer or alarm signals through its extra wires. Builders who need standard three or four-pin PWM headers, LED lighting or larger frame sizes will not be able to use this fan without adapters or redesign.

Critical spec: seven-wire eight-pin power connector

The connector layout is the single detail that decides compatibility; the pin-out must match the motherboard or backplane header exactly. Verify the wiring scheme against your system documentation before purchase because an incorrect match will prevent the fan from spinning or reporting speed.

Pluspunten

  • Two-ball bearing for extended service life
  • 12 V 1.14 A power draw fits standard server rails
  • 40 mm × 48 mm footprint suits tight 1U chassis
  • Seven-wire eight-pin connector enables full speed and monitoring control
  • Non-LED black frame keeps rack lighting clean

Specificaties

Brand3ccooler.com
SeriesDB04048B12U 0065
ModelDB04048B12U
TypeCase Fan
Bearing Type2 Ball
Power Connector7 Wires
ColorBlack
LEDNon-LED
Dimensions40*48mm

Vragen over dit artikel

What does the 7-wire 8-pin connector provide compared with a standard 3-pin or 4-pin fan header?

The seven conductors give the motherboard full access to tachometer, PWM control, alarm and sensor lines on the DB04048B12U, so the server can monitor speed, vary voltage and flag faults without extra wiring.

The listing shows DB04048B12U and a 0065 suffix — which one should I order for a 12 V 1.14 A server slot?

Both codes describe the same 40×48 mm dual-ball-bearing fan rated at 12 V and 1.14 A; order the DB04048B12U 0065 unit and it will match the spec.

How much airflow can I expect from the 40×48 mm frame running at 12 V in a 1 U chassis?

At 12 V the 4048 frame draws 1.14 A through its dual-ball bearings, delivering the high static pressure needed for dense 1 U server airflow paths.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.