Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 92mm square axial case fan with sleeve bearing and 3-pin connector

Zyvpee

Zyvpee KD1209PTS2 92mm 12V 2.5W 3-pin sleeve case fan

SKU CH-0QVY-Q40H0

92 mm sleeve-bearing case fan running at 12 V and 2.5 W with a 3-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve bearing
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Quiet sleeve bearing runs smoothly
  • Low 2.5W draw keeps power use minimal
  • 92 mm square frame fits standard mounts
  • 3-pin DC connector enables speed monitoring
  • 25 mm depth suits slim chassis builds

Zyvpee KD1209PTS2 92mm 12V case fan

This 92mm square frame fan draws 2.5W at 12V and fits standard 92mm mounting holes. It uses a sleeve bearing and a 3-pin power connector for direct motherboard or fan-controller connection. The black non-LED design suits builds that prefer no lighting.

Practical limits of 3-pin DC control

A 3-pin connector varies speed by changing voltage, so the minimum speed is set by the motor's start-up voltage. The sleeve bearing runs quietly at low RPM but may wear faster than ball bearings in continuous high-temperature operation. The 25mm thickness matches the common 9225 form factor for tight clearance.

Check mounting depth and header type

Verify your case or heatsink accepts a 25mm thick 92mm fan before ordering. Confirm the motherboard or controller provides a 3-pin DC header; a 4-pin PWM header will run the fan but speed control will remain voltage-based. Ensure the 12V rail can supply the 2.5W draw.

Pluspunten

  • Quiet sleeve bearing runs smoothly
  • Low 2.5W draw keeps power use minimal
  • 92 mm square frame fits standard mounts
  • 3-pin DC connector enables speed monitoring
  • 25 mm depth suits slim chassis builds

Specificaties

SeriesKD1209PTS2
ModelKD1209PTS2
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve bearing
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions92mm*92mm*25mm

Vragen over dit artikel

Which version of the KD1209PTS2 fits a standard 92 mm case opening?

The KD1209PTS2 measures 92 mm by 92 mm by 25 mm, matching the common 92 mm square mounting pattern used in many chassis.

What does the 12 V 2.5 W rating mean for airflow inside a real PC?

At 12 V the motor consumes 2.5 W, delivering modest airflow suited to low-heat builds or auxiliary intake and exhaust positions.

How does the 3-pin connector limit speed control in practice?

The 3-pin header supplies constant 12 V; speed can only be reduced by lowering voltage, so the fan runs at full speed unless the motherboard supports DC voltage control.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.