Zyvpee
Zyvpee KDE1209PTB1 90x25mm 3-pin case fan
A 90 mm ball-bearing fan with a 3-pin connector runs at up to 1600 RPM for CPU cooler airflow
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Ball bearing for reliable long-life operation
- 12 V 2.2 W draw keeps power use low
- 3-pin connector fits standard motherboard headers
- 90 mm × 25 mm frame suits compact CPU coolers
- Under 1600 RPM for quiet airflow
90 mm 3-pin CPU cooler fan
The Zyvpee KDE1209PTB1 is a 90 by 25 mm frame fan built for CPU cooler mounting. It runs on 12 V DC, draws 2.2 W, and spins up to 1600 RPM using a ball-bearing motor. A three-wire connector provides power and tachometer feedback without PWM control.
Builders replacing a 90 mm cooler fan
This unit suits repair jobs or custom coolers that accept a 90 mm frame and a three-pin header. It is not for builders who need PWM speed regulation, larger frame dimensions, or any form of LED illumination.
3-pin non-PWM power connector
The three-pin interface delivers fixed-voltage operation and RPM reporting but cannot accept pulse-width modulation signals from the motherboard. Verify that the target cooler or header supports three-pin control before purchasing.
Pluspunten
- Ball bearing for reliable long-life operation
- 12 V 2.2 W draw keeps power use low
- 3-pin connector fits standard motherboard headers
- 90 mm × 25 mm frame suits compact CPU coolers
- Under 1600 RPM for quiet airflow
Specificaties
| Brand | Zyvpee |
|---|---|
| Series | KDE1209PTB1 |
| Model | KDE1209PTB1 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 90*25MM |
Vragen over dit artikel
Will this 90 mm fan fit the mounting holes on my existing 9025 CPU cooler?
The fan measures 90 by 25 mm, matching the standard 9025 frame size used on many CPU coolers.
Can I run this 3-pin fan on an older motherboard that only has 4-pin headers?
Yes, the 3-pin connector fits a 4-pin header; the fourth pin simply remains unused and the fan will run at full speed.
How can I confirm the fan is spinning at the rated speed after installation?
Check the RPM reading in BIOS or monitoring software; it should report up to 1600 RPM when the fan is powered at 12 V.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001048BTC
Op voorraad