Zyvpee
Zyvpee MADC24H7C-943 170mm 24V 1.05A 172*51mm case fan
A 170 mm dual-ball-bearing case fan running on 24 V at 1.05 A with a 172 × 51 mm silver frame
- TypeCase Fan
- CompatibilityCase
- Fan Size170mm
- Bearing Type2 Ball
- Power Connector2 wires
- ColorSilver
- 170 mm frame fits large enclosures
- 24 V 1.05 A input suits industrial power rails
- Dual-ball bearing extends service life
- 172 × 51 mm footprint matches standard 170 mm mounts
- Non-LED silver finish keeps builds clean
170 mm 24 V dual-wire case fan
This Zyvpee MADC24H7C-943 axial fan measures 172 by 51 millimetres and draws 1.05 amperes at 24 volts. It uses a two-ball bearing and a two-wire power connector without LED lighting. The silver frame suits industrial or servo cooling roles that require this exact voltage and frame depth.
Suited for 24 V systems needing a 170 mm frame
Installers replacing a Weiken frequency-converter fan or similar 24 V equipment will find the electrical and mechanical match direct. Builders whose hardware only supplies other voltages or standard three- or four-pin headers should look elsewhere because the connector and voltage differ.
24 V 1.05 A rating is the deciding spec
The fan only operates at 24 volts with a 1.05 ampere draw, so the power source must match both values exactly. If the available supply provides a different voltage or current capability, this unit will not function correctly.
Pluspunten
- 170 mm frame fits large enclosures
- 24 V 1.05 A input suits industrial power rails
- Dual-ball bearing extends service life
- 172 × 51 mm footprint matches standard 170 mm mounts
- Non-LED silver finish keeps builds clean
Specificaties
| Brand | Zyvpee |
|---|---|
| Series | MADC24H7C-943 |
| Model | MADC24H7C-943 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 170mm |
| Bearing Type | 2 Ball |
| Power Connector | 2 wires |
| Color | Silver |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 172*51mm |
Vragen over dit artikel
How often do the 2-ball bearings in the 170mm fan need service or replacement?
The dual ball bearings are sealed and rated for continuous operation without scheduled lubrication; replacement is only required if noise or vibration develops after extended use.
What limits continuous running of the 24V 1.05A motor?
The 24 V supply and 1.05 A draw set the thermal ceiling; sustained load is limited by the motor's ability to dissipate heat through the 172×51 mm frame.
How much noise and heat does the 17cm servo fan produce at full 24V load?
At 24 V and 1.05 A the fan moves air with a measurable but moderate acoustic signature; the 51 mm thick housing spreads heat so surface temperature stays within safe limits for enclosure mounting.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001057BTC
Op voorraad