Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 90x32mm 4-pin ball bearing case fan

Zyvpee

Zyvpee PSD1209PLV2-A 90x32mm 4-pin 12V 4.2W ball bearing case fan

SKU CH-H3Z4-FW10A

A 90 mm by 32 mm ball-bearing case fan running on 12 V with a four-pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Wires
  • ColorBlack
  • LEDNon-LED
  • Ball bearing suited for server CPU cooling
  • 4-pin connector enables PWM speed control
  • 12 V 4.2 W power rating for efficient airflow
  • 90 mm by 32 mm compact form factor
  • Non-LED black design for discreet builds

90×32 mm server-grade cooler fan

This Zyvpee PSD1209PLV2-A is a 90 mm by 32 mm case fan built for CPU cooler and server cooling duties. It runs on 12 V DC, draws 4.2 W and uses a four-wire PWM connector for speed control. The ball-bearing motor and non-LED black frame are intended for continuous operation in dense enclosures.

Suits builds that need a 90 mm thick fan

The 32 mm thickness fits coolers and server chassis designed for this specific profile. Builders whose cooler or chassis requires a slimmer frame, a different mounting hole pattern, or integrated lighting will not be able to use this unit. Anyone needing a higher airflow rating or a different voltage should also look elsewhere.

Four-wire 12 V PWM power connector

The 4-pin connector enables motherboard or controller-based speed regulation, which is the deciding factor for compatibility with modern fan headers. If the target system only provides three-pin voltage control or a proprietary header, this fan will not operate as intended.

Pluspunten

  • Ball bearing suited for server CPU cooling
  • 4-pin connector enables PWM speed control
  • 12 V 4.2 W power rating for efficient airflow
  • 90 mm by 32 mm compact form factor
  • Non-LED black design for discreet builds

Specificaties

BrandZyvpee
SeriesPSD1209PLV2-A
ModelPSD1209PLV2-A
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesServer CPU Cooling
Dimensions90*32MM

Vragen over dit artikel

What does the 4.2 W rating mean for my motherboard header?

The fan draws 4.2 W at 12 V, well within the typical 1 A limit of a standard 4‑pin CPU fan header.

How does the 4‑pin PWM connector control the fan speed?

The fourth pin carries a PWM signal from the motherboard, letting the BIOS vary the fan speed from minimum to maximum without changing the 12 V supply.

Will the 90 mm by 32 mm frame fit my CPU cooler mounting holes?

The fan measures 90 mm square with a 32 mm thickness; verify your cooler uses 90 mm hole spacing before mounting.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.