Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

Fans

Fans MMF-06D24DS-RC7 case fan 60x60x25mm 24VDC 0.09A

SKU CH-RQJD-HYG5M MPN MMF-06D24DS-RC7

A 60 mm square axial case fan running on 24 VDC at 0.09 A with a three-wire speed detection function

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Mitsubishi 60 mm 24 VDC axial fan

This Mitsubishi MMF-06D24DS-RC7 is a 60 by 60 by 25 mm axial case fan that runs on 24 VDC and draws 0.09 A. It uses a three-wire connection with a speed detection function. The compact frame suits tight chassis spaces or industrial enclosures.

Suits 24 V systems needing tach feedback

Builders working with a 24 VDC rail who require a tachometer signal for monitoring will find this unit a direct fit. Systems that only provide a different voltage rail or demand a four-wire PWM control interface cannot use this fan as supplied.

Three-wire detection at 0.09 A

The single deciding specification is the three-wire interface that delivers speed detection at a rated 0.09 A current draw. Match both the voltage and the connector pin-out to your controller before ordering.

Høydepunkter

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

What does the three-wire interface with detection provide on this 24 VDC fan?

The third wire carries a speed signal so the controller can monitor RPM and trigger alarms if the fan stalls.

What mounting dimensions does the 60 mm square frame require?

Four screw holes on a 60 mm pitch with a 25 mm depth clearance for the frame.

How is the fan wired into a Yaskawa inverter system?

Connect red to 24 VDC, black to ground, and the yellow sense wire to the inverter’s fan feedback input; power on only after all three leads are seated.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.