我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Square black 60mm frame 25mm deep three-wire axial fan

Fans

Fans MMF-06D24DS-RC7 case fan 60x60x25mm 24VDC 0.09A

SKU CH-RQJD-HYG5M MPN MMF-06D24DS-RC7

A 60 mm square axial case fan running on 24 VDC at 0.09 A with a three-wire speed detection function

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Mitsubishi 60 mm 24 VDC axial fan

This Mitsubishi MMF-06D24DS-RC7 is a 60 by 60 by 25 mm axial case fan that runs on 24 VDC and draws 0.09 A. It uses a three-wire connection with a speed detection function. The compact frame suits tight chassis spaces or industrial enclosures.

Suits 24 V systems needing tach feedback

Builders working with a 24 VDC rail who require a tachometer signal for monitoring will find this unit a direct fit. Systems that only provide a different voltage rail or demand a four-wire PWM control interface cannot use this fan as supplied.

Three-wire detection at 0.09 A

The single deciding specification is the three-wire interface that delivers speed detection at a rated 0.09 A current draw. Match both the voltage and the connector pin-out to your controller before ordering.

商品特色

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

商品規格

本商品目前尚未公佈規格。

商品問答

What does the three-wire interface with detection provide on this 24 VDC fan?

The third wire carries a speed signal so the controller can monitor RPM and trigger alarms if the fan stalls.

What mounting dimensions does the 60 mm square frame require?

Four screw holes on a 60 mm pitch with a 25 mm depth clearance for the frame.

How is the fan wired into a Yaskawa inverter system?

Connect red to 24 VDC, black to ground, and the yellow sense wire to the inverter’s fan feedback input; power on only after all three leads are seated.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。