暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square black 60mm frame 25mm deep three-wire axial fan

Fans

Fans MMF-06D24DS-RC7 case fan 60x60x25mm 24VDC 0.09A

SKU CH-RQJD-HYG5M MPN MMF-06D24DS-RC7

A 60 mm square axial case fan running on 24 VDC at 0.09 A with a three-wire speed detection function

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Mitsubishi 60 mm 24 VDC axial fan

This Mitsubishi MMF-06D24DS-RC7 is a 60 by 60 by 25 mm axial case fan that runs on 24 VDC and draws 0.09 A. It uses a three-wire connection with a speed detection function. The compact frame suits tight chassis spaces or industrial enclosures.

Suits 24 V systems needing tach feedback

Builders working with a 24 VDC rail who require a tachometer signal for monitoring will find this unit a direct fit. Systems that only provide a different voltage rail or demand a four-wire PWM control interface cannot use this fan as supplied.

Three-wire detection at 0.09 A

The single deciding specification is the three-wire interface that delivers speed detection at a rated 0.09 A current draw. Match both the voltage and the connector pin-out to your controller before ordering.

特長

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What does the three-wire interface with detection provide on this 24 VDC fan?

The third wire carries a speed signal so the controller can monitor RPM and trigger alarms if the fan stalls.

What mounting dimensions does the 60 mm square frame require?

Four screw holes on a 60 mm pitch with a 25 mm depth clearance for the frame.

How is the fan wired into a Yaskawa inverter system?

Connect red to 24 VDC, black to ground, and the yellow sense wire to the inverter’s fan feedback input; power on only after all three leads are seated.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。